Page History
...
With TE0703 and TE0703 default CPLD firmware:
- Connect MiniUSB cable to J4
- Set DIP Switch S2-2 to OFF and S2-3 to ON position, see TE0703 CPLD - CC703S#CC703S-JTAG
- Power ON the board
- Run "Lattice Diamond Programmer"
Select "Create new project from JTAG chain" and press "OK"
With TE0705:
- Connect MiniUSB cable to J7
- Set DIP Switch S3-ENJTAG, S3-M1 and S3-M2 to ON position, see TE0705 CPLD#JTAG
- Power ON the board
- Run "Lattice Diamond Programmer"
Select "Create new project from JTAG chain" and press "OK"
With TE0706:
...
- need special TE0703 CLPD Firmware to get access
With TE0705:
need special TE0705 CLPD Firmware to get access
With TE0706:
- not possible
...
Available CPLD Firmware
- TE0715 CPLD - Firmware description
...
Overview
Content Tools