Page History

Table of contents

General instructions

...

...

CPLD Access  

Set B2B Pin JM1-89 (JTAGEN) to VDD (3.3V)

...

• TE0820 CPLD - Firmware description with different Variants for PCB REV03 and newer
  • QSPI / SD Boot Modi - Default delivered, QSPI or SD Boot Mode is selectable (Special FSBL for QSPI Programming with Boot Mode /= JTAG will be provided for Vivado 2017.4 Reference Design and newer).
  • QSPI / JTAG Boot Modi - Use QSPI  or JTAG Boot Mode is selectable
  • JTAG / SD Boot Modi - SD or JTAG Boot Mode is selectable 
  • JTAG / QSPI / SD Boot Modi - QSPI, SD or JTAG Boot Mode is selectable (CPLD Pin 23 (NOSEQ) is used as second Boot Mode pin to select JTAG Boot Mode). Attention: This need 7 Series 4x5 Carrier CPLD Firmware update.
• TE0820-REV01_REV02 CPLD - Firmware description with different Variants
  • QSPI / SD Boot Modi - Default delivered, QSPI or SD Boot Mode is selectable (Special FSBL for QSPI Programming with Boot Mode /= JTAG will be provided for Vivado 2017.4 Reference Design and newer).
  • QSPI / JTAG Boot Modi - Use QSPI  or JTAG Boot Mode is selectable
  • JTAG / SD Boot Modi - SD or JTAG Boot Mode is selectable 
  • JTAG / QSPI / SD Boot Modi - QSPI, SD or JTAG Boot Mode is selectable (CPLD Pin 23 (NOSEQ) is used as second Boot Mode pin to select JTAG Boot Mode). Attention: This need 7 Series 4x5 Carrier CPLD Firmware update.

General instructions