Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Connect MiniUSB cable to XMOD
  2. Set DIP Switch S1-2 to OFF position, see TE0706 TRM#4-bitDIP-switch
  3. Power ON the board
  4. Run "Lattice Diamond Programmer"
  5. Select "Create new project from JTAG chain" and press "OK"

Available CPLD Firmware

  • TE0823 CPLD - Firmware description with different Variants for PCB REV03 and newer
    • QSPI / SD Boot Modi - Default delivered, QSPI or SD Boot Mode is selectable (Special FSBL for QSPI Programming with Boot Mode /= JTAG will be provided for Vivado 2017.4 Reference Design and newer).
    tbd

Download

  • TE0823/<PCB Revision>/Firmware/
    • Use files from the subfolders of your PCB revision

...