Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Page properties
hiddentrue
idComments

Template Revision 2.7 - on construction

Design Name always "TE Series Name" + Design name, for example "TE0720 Test Board"


HTML
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>


Page properties
hiddentrue
idComments

Important General Note:

  • Export PDF to download, if vivado revision is changed!

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template (note: inner scroll ignore/only only with drawIO object):

        Scroll Title
        anchorFigure_xyz
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, use


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables
        • Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)

      • Scroll Title
        anchorTable_xyz
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefault
        sortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



  • ...


Scroll pdf ignore

Table of contents

Table of Contents
outlinetrue

Overview

Page properties
hiddentrue
idComments

Notes :

ZynqMP PS Design with Linux Example and simple frequency counter to measure SI5338 Reference CLK with Vivado HW-Manager. Only for use with TEF1002 Carrier.
Wiki Resources page: http://trenz.org/te0820-info

Key Features

Page properties
hiddentrue
idComments

Notes :

  • Add basic key futures, which can be tested with the design


Excerpt
  • Vitis/Vivado 2019.2
  • PetaLinux
  • PCIe (endpoint)
  • SATA
  • SD
  • ETH
  • USB
  • I2C
  • RTC
  • FMeter
  • MAC from EEPROM
  • User LED (PCB REV03 only)
  • Modified FSBL for SI5338 programming
  • Special FSBL for QSPI programming

Revision History

Page properties
hiddentrue
idComments

Notes :

  • add every update file on the download
  • add design changes on description


Scroll Title
anchorTable_DRH
titleDesign Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateVivadoProject BuiltAuthorsDescription
2020-02-142019.2TE0820-TD_TEF1002_noprebuilt-vivado_2019.2-build_6_20200217120248.zip
TE0820-TD_TEF1002-vivado_2019.2-build_6_20200217120209.zip
Martin Rohrmüller
  • initial release


Release Notes and Know Issues

Page properties
hiddentrue
idComments
Notes :
  • add known Design issues and general notes for the current revision
  • do not delete known issue, add fixed version time stamp if  issue fixed


Scroll Title
anchorTable_KI
titleKnown Issues

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

IssuesDescriptionWorkaroundTo be fixed version
----


Requirements

Software

Page properties
hiddentrue
idComments

Notes :

  • list of software which was used to generate the design


Scroll Title
anchorTable_SW
titleSoftware

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SoftwareVersionNote
Vitis2019.2needed
Vivado is included into Vitis installation
PetaLinux2019.2needed
SI ClockBuilder Pro---optional


Hardware

Page properties
hiddentrue
idComments

Notes :

  • list of software which was used to generate the design

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

Scroll Title
anchorTable_HWM
titleHardware Modules

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue


Module ModelBoard Part Short NamePCB Revision SupportDDRQSPI FlashEMMCOthersNotes
TE0820-ES1           es1            REV01     1GB      64MB      4GB        NA                     Not longer supported by vivado   
TE0820-02-02EG-1E    2eg_1e_1gb     REV02     1GB      64MB      4GB        NA                     NA                                 
TE0820-02-02EG-1E3   2eg_1e_1gb     REV02     1GB      64MB      4GB        2.5 mm connectors    NA                                 
TE0820-02-02CG-1E    2cg_1e_1gb     REV02     1GB      64MB      4GB        NA                     NA                                 
TE0820-02-03EG-1E    3eg_1e_1gb     REV02     1GB      64MB      4GB        NA                     NA                                 
TE0820-02-03EG-1E3   3eg_1e_1gb     REV02     1GB      64MB      4GB        2.5 mm connectors    NA                                 
TE0820-02-03CG-1E    3cg_1e_1gb     REV02     1GB      64MB      4GB        NA                     NA                                 
TE0820-02-02EG-1EA   2eg_1e_1gb     REV02     1GB      128MB     4GB        NA                     NA                                 
TE0820-02-02EG-1EL   2eg_1e_1gb     REV02     1GB      128MB     4GB        2.5 mm connectors    NA                                 
TE0820-02-02CG-1EA   2cg_1e_1gb     REV02     1GB      128MB     4GB        NA                     NA                                 
TE0820-02-03EG-1EA   3eg_1e_1gb     REV02     1GB      128MB     4GB        NA                     NA                                 
TE0820-02-03EG-1EL   3eg_1e_1gb     REV02     1GB      128MB     4GB        2.5 mm connectors    NA                                 
TE0820-02-03CG-1EA   3cg_1e_1gb     REV02     1GB      128MB     4GB        NA                     NA                                 
TE0820-02-04CG-1EA   4cg_1e_1gb     REV02     1GB      128MB     4GB        NA                     NA                                 
TE0820-03-04EV-1EA   4ev_1e_2gb     REV03     2GB      128MB     4GB        NA                     NA                                 
TE0820-03-02CG-1EA   2cg_1e_2gb     REV03     2GB      128MB     4GB        NA                     NA                                 
TE0820-03-02EG-1EA   2eg_1e_2gb     REV03     2GB      128MB     4GB        NA                     NA                                 
TE0820-03-02EG-1EL   2eg_1e_2gb     REV03     2GB      128MB     4GB        2.5 mm connectors    NA                                 
TE0820-03-03CG-1EA   3cg_1e_2gb     REV03     2GB      128MB     4GB        NA                     NA                                 
TE0820-03-04CG-1EA   4cg_1e_2gb     REV03     2GB      128MB     4GB        NA                     NA                                 
TE0820-03-03EG-1EA   3eg_1e_2gb     REV03     2GB      128MB     4GB        NA                     NA                                 
TE0820-03-03EG-1EL   3eg_1e_2gb     REV03     2GB      128MB     4GB        2.5 mm connectors    NA                                 
TE0820-03-2AI21FA   2cg_1i_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-2BE21FL   2eg_1e_2gb     REV03     2GB      128MB     8GB        2.5 mm connectors    NA                                 
TE0820-03-3AI210A   3cg_1i_2gb     REV03     2GB      128MB     0GB        NA                     NA                                 
TE0820-03-3BE21FA   3eg_1e_2gb     REV03     2GB      128MB     4GB        NA                     NA                                 
TE0820-03-3BE21FL   3eg_1e_2gb     REV03     2GB      128MB     4GB        2.5 mm connectors    NA                                 
TE0820-03-02CG-1ED   2cg_1e_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-2AE21FA    2cg_1e_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-2BE21FA    2eg_1e_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-3AE21FA    3cg_1e_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-3AI21FA    3cg_1i_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-4AE21FA    4cg_1e_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-4DE21FA    4ev_1e_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 
TE0820-03-4DI21FA    4ev_1i_2gb     REV03     2GB      128MB     8GB        NA                     NA                                 


Design supports following carriers:

Scroll Title
anchorTable_HWC
titleHardware Carrier

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Carrier ModelNotes
TEF1002
  • from REV02 onwards


Additional HW Requirements:

Scroll Title
anchorTable_AHW
titleAdditional Hardware

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Additional HardwareNotes
USB Cable for JTAG/UARTCheck Carrier Board and Programmer for correct typ
CoolerIt's recommended to use cooler on ZynqMP device


Content

Page properties
hiddentrue
idComments

Notes :

  • content of the zip file

For general structure and of the reference design, see Project Delivery - Xilinx devices.

Design Sources

Scroll Title
anchorTable_DS
titleDesign sources

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

TypeLocationNotes
Vivado<design name>/block_design
<design name>/constraints
<design name>/ip_lib
Vivado Project will be generated by TE Scripts
Vitis<design name>/sw_libAdditional Software Template for Vitis and apps_list.csv with settings automatically for Vitis app generation
PetaLinux<design name>/os/petalinuxPetaLinux template with current configuration


Additional Sources

Scroll Title
anchorTable_ADS
titleAdditional design sources

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

TypeLocationNotes
SI5338<design name>/misc/Si5338SI5338 Project with current PLL Configuration
init.sh<design name>/sd/Additional Initialization Script for Linux



Prebuilt

Page properties
hiddentrue
idComments

Notes :

  • prebuilt files
  • Template Table:

    • Scroll Title
      anchorTable_PF
      titlePrebuilt files

      Scroll Table Layout
      orientationportrait
      sortDirectionASC
      repeatTableHeadersdefault
      sortByColumn1
      sortEnabledfalse
      cellHighlightingtrue

      File

      File-Extension

      Description

      BIF-File*.bifFile with description to generate Bin-File
      BIN-File*.binFlash Configuration File with Boot-Image (Zynq-FPGAs)
      BIT-File*.bitFPGA (PL Part) Configuration File
      DebugProbes-File*.ltxDefinition File for Vivado/Vivado Labtools Debugging Interface

      Debian SD-Image

      *.img

      Debian Image for SD-Card

      Diverse Reports---Report files in different formats
      Hardware-Platform-Specification-Files*.xsaExported Vivado Hardware Specification for Vitis and PetaLinux
      LabTools Project-File*.lprVivado Labtools Project File

      MCS-File

      *.mcs

      Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

      MMI-File

      *.mmi

      File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)

      OS-Image*.ubImage with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
      Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems

      SREC-File

      *.srec

      Converted Software Application for MicroBlaze Processor Systems




Scroll Title
anchorTable_PF
titlePrebuilt files (only on ZIP with prebult content)

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

File

File-Extension

Description

BIF-File*.bifFile with description to generate Bin-File
BIN-File*.binFlash Configuration File with Boot-Image (Zynq-FPGAs)
BIT-File*.bitFPGA (PL Part) Configuration File
DebugProbes-File*.ltxDefinition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports---Report files in different formats
Hardware-Platform-Specification-Files*.xsaExported Vivado Hardware Specification forVitis and PetaLinux
LabTools Project-File*.lprVivado Labtools Project File
OS-Image*.ubImage with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
Software-Application-File*.elfSoftware Application for Zynq or MicroBlaze Processor Systems


Download

Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.

Page properties
hiddentrue
idComments

Reference Design is available on:

Design Flow

Page properties
hiddentrue
idComments
Notes :
  • Basic Design Steps

  • Add/ Remove project specific description


Note

Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

See also:

The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality


  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
  2. Press 0 and enter to start "Module Selection Guide"
  3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
  4. Create Project (follow instruction of the product selection guide), settings file will be configured automatically during this process
    1. (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see also TE Board Part Files
  5. Create XSA and export to prebuilt folder
    1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
  6. Create Linux (bl31.elf, uboot.elf and image.ub) with exported XSA
    1. XSA is exported to "prebuilt\hardware\<short name>"
      Note: HW Export from Vivado GUI create another path as default workspace.
    2. Create Linux images on VM, see PetaLinux KICKstart
      1. Use TE Template from "/os/petalinux"
  7. Add Linux files (bl31.elf, uboot.elf and image.ub) to prebuilt folder
    1. "prebuilt\os\petalinux\<DDR size>" or "prebuilt\os\petalinux\<short name>"
      Notes: Scripts select "prebuilt\os\petalinux\<short name>", if exist, otherwise "prebuilt\os\petalinux\<DDR size"
  8. Generate Programming Files with Vitis
    1. Run on Vivado TCL: TE::sw_run_vitis -all
      Note: Depending of PC performance this can take several minutes. Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv" and open Vitis
    2. (alternative) Start Vitis with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_vitis
      Note:  TCL scripts generate also platform project, this must be done manuelly in case GUI is used. See Vitis

Launch

Page properties
hiddentrue
idComments

Note:

  • Programming and Startup procedure

Programming

Note

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging.

Note: Depending on CPLD Firmware and Boot Mode settings, QSPI boot with Linux image on SD or complete SD Boot is possible.

Get prebuilt boot binaries

  1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
  2. Press 0 and enter to start "Module Selection Guide"
    1. Select assembly version
    2. Validate selection
    3. Select Create and open delivery binary folder
      Note: Folder (<project foler>/_binaries_<Artikel Name>) with subfolder (boot_<app name>) for different applications will be generated

QSPI

Optional for Boot.bin on QSPI Flash and image.ub on SD.

  1. Connect JTAG and power on carrier with module
  2. Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
  3. Type on Vivado TCL Console: TE::pr_program_flash_binfile -swapp u-boot
    Note: To program with SDK/Vivado GUI, use special FSBL (zynqmp_fsbl_flash) on setup
              optional "TE::pr_program_flash_binfile -swapp hello_te0820" possible
  4. Copy image.ub on SD-Card
    • use files from (<project foler>/_binaries_<Artikel Name>)/boot_linux from generated binary folder,see: Get prebuilt boot binaries
    • or use prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
  5. Insert SD-Card

SD

Use this description for CPLD Firmware with SD Boot selectable.

  1. Copy image.ub and Boot.bin on SD-Card.
    • For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
  2. Insert SD-Card in SD-Slot.

JTAG

Not used on this Example.

Usage

  1. Prepare HW like described on section TEF1002 Getting Started
    1. for PCIe insert TEF1002 in PCIe slot and connect PC PCIe 6 pin power connector
  2. Connect JTAG/UART USB
  3. Connect SATA device
  4. Select Boot Mode (S3-1)
  5. Power On PCB
    Note: 1. ZynqMP Boot ROM loads PMU Firmware and  FSBL from SD/QSPI Flash into OCM, 2. FSBL loads ATF(bl31.elf) and U-boot from SD into DDR, 3. U-boot load Linux from SD into DDR

Linux

  1. Open Serial Console (e.g. putty)
    1. Speed: 115200
    2. COM Port: Win OS, see device manager, Linux OS see  dmesg |grep tty  (UART is *USB1)
  2. Linux Console:
    Note: Wait until Linux boot finished For Linux Login use:
    1. User Name: root
    2. Password: root
  3. You can use Linux shell now.
    1. I2C 0 Bus type: i2cdetect -y -r 0
    2. RTC check: dmesg | grep rtc
    3. ETH0 works with udhcpc
    4. USB type  "lsusb" or connect USB2.0 device
    5. SATA device
      1. dmesg | grep -i sata | grep 'link up'
      2. fdisk -l /dev/sd*
      3. partitions are mounted to /run/media/sdXY: df -h
  4. Option Features
    1. Webserver to get access to Zynq
      1. insert IP on web browser to start web interface
    2. init.sh scripts
      1. add init.sh script on SD, content will be load automatically on startup (template included in ./misc/SD)

Vivado HW Manager

Page properties
hiddentrue
idComments

Note:

  • Add picture of HW Manager

  • add notes for the signal either groups or topics, for example:

    Control:

    • add controllable IOs with short notes..

    Monitoring:

    • add short notes for signals which will be monitored only

    SI5338_CLK0 Counter: 

    Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).Set radix from VIO signals to unsigned integer.Note: Frequency Counter is inaccurate and displayed unit is Hz


SI5338_CLK0 Counter: 

  1. Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).
    1. Set radix from VIO signals to unsigned integer.
      Note: Frequency Counter is inaccurate and displayed unit is Hz

SI5338 CLK is configured to  200MHz by default.

PCB REV03 Design:

Scroll Title
anchorFigure_VHM
titleVivado Hardware Manager

PCB REV01, REV02 Design:

Scroll Title
anchorFigure_VHM1
titleVivado Hardware Manager PCB REV01,REV02

System Design - Vivado

Page properties
hiddentrue
idComments

Note:

  • Description of Block Design, Constrains... BD Pictures from Export...

Block Design

PCB REV03

PCB REV01 REV02

PS Interfaces

Activated interfaces:

TypeNote
DDR
PCIeGTR Lane0, 100MHz endpoint, RESET# MIO33
SATAGTR Lane3, 125MHz
QSPIMIO
SD0MIO
SD1MIO
I2C0MIO
UART0MIO
GPIO0MIO
SWDT0..1
TTC0..3
GEM3MIO
USB0MIO, USB2 only


Constrains

Basic module constrains

Code Block
languageruby
title_i_bitgen_common.xdc
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design

Design specific constrain

Code Block
languageruby
title_i_io.xdc
set_property PACKAGE_PIN K9 [get_ports {SI5338_CLK0_D_clk_p[0]}]
set_property IOSTANDARD LVDS [get_ports {SI5338_CLK0_D_clk_p[0]}]
set_property DIFF_TERM TRUE [get_ports {SI5338_CLK0_D_clk_p[0]}]

set_property PACKAGE_PIN H1 [get_ports {x0[0]}]
set_property IOSTANDARD LVCMOS18 [get_ports {x0[0]}]
set_property PACKAGE_PIN J1 [get_ports {x1[0]}]
set_property IOSTANDARD LVCMOS18 [get_ports {x1[0]}]

Software Design - Vitis

Page properties
hiddentrue
idComments
Note:
  • optional chapter separate

  • sections for different apps


For SDK project creation, follow instructions from:

Vitis

Application

Page properties
hiddentrue
idComments

----------------------------------------------------------

FPGA Example

todo..

----------------------------------------------------------

Zynq Example:

zynq_fsbl

TE modified 2018.3 FSBL

General:

  • Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
  • Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\

  • General Changes: 
    • Display FSBL Banner and Device ID

Module Specific:

  • Add Files: all TE Files start with te_*
    • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot  platform-top.h)
    • CPLD access
    • Read CPLD Firmware and SoC Type
    • Configure Marvell PHY

zynq_fsbl_flash

TE modified 2018.3 FSBL

General:

  • Modified Files: main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2018.3 FSBL

General:

  • Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
  • Add Files:  te_xfsbl_hooks.h/.c (for hooks and board)\n\
  • General Changes: 
    • Display FSBL Banner and Device Name

Module Specific:

  • Add Files: all TE Files start with te_*
    • Si5338 Configuration
    • ETH+OTG Reset over MIO

zynqmp_fsbl_flash

TE modified 2018.3 FSBL

General:

  • Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation


zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

Template location: ./sw_lib/sw_apps/

zynqmp_fsbl

TE modified 2019.2 FSBL

General:

  • Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
  • Add Files:  te_xfsbl_hooks.h/.c (for hooks and board)\n\
  • General Changes: 
    • Display FSBL Banner and Device Name

Module Specific:

  • Add Files: all TE Files start with te_*
    • Si5338 Configuration
    • ETH+OTG Reset over MIO

zynqmp_fsbl_flash

TE modified 2019.2 FSBL

General:

  • Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
  • General Changes:
    •  Display FSBL Banner
    • Set FSBL Boot Mode to JTAG
    • Disable Memory initialisation

zynqmp_pmufw

Xilinx default PMU firmware.

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

Software Design -  PetaLinux

Page properties
hiddentrue
idComments
Note:
  • optional chapter separate

  • sections for linux

  • Add "No changes." or "Activate: and add List"

For PetaLinux installation and  project creation, follow instructions from:

Config

Start with petalinux-config or petalinux-config --get-hw-description

Changes:

  • CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_1_SELECT=y
  • CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_MAC=""

U-Boot

Start with petalinux-config -c u-boot
Changes:

  • CONFIG_ENV_IS_NOWHERE=y

  • # CONFIG_ENV_IS_IN_SPI_FLASH is not set

  • CONFIG_I2C_EEPROM=y

  • CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA

  • CONFIG_SYS_I2C_EEPROM_ADDR=0x50

  • CONFIG_SYS_I2C_EEPROM_BUS=0

  • CONFIG_SYS_EEPROM_SIZE=256

  • CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=0

  • CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=0

  • CONFIG_SYS_I2C_EEPROM_ADDR_LEN=1

  • CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0


Change platform-top.h:

Code Block
languagejs

Device Tree

Code Block
languagejs
/include/ "system-conf.dtsi"
/ {
  chosen {
    xlnx,eeprom = &eeprom;
  };
};


/* SDIO */

&sdhci1 {
   disable-wp;
   no-1-8-v;
};

/* ETH PHY */
&gem3 {

	status = "okay";
  ethernet_phy0: ethernet-phy@0 {
		compatible = "marvell,88e1510";
		device_type = "ethernet-phy";
    		reg = <1>;
	};
};
/* USB 2.0 */
 
/* USB  */
&dwc3_0 {
    status = "okay";
    dr_mode = "host";
    maximum-speed = "high-speed";
    /delete-property/phy-names;
    /delete-property/phys;
    /delete-property/snps,usb3_lpm_capable;
 	 snps,dis_u2_susphy_quirk;
  	snps,dis_u3_susphy_quirk;
};
   
&usb0 {
    status = "okay";
    /delete-property/ clocks;
    /delete-property/ clock-names;
    clocks = <0x3 0x20>;
    clock-names = "bus_clk";
};




/* QSPI PHY */
&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};

&i2c0 {
  eeprom: eeprom@50 { 
     compatible = "atmel,24c08";
     reg = <0x50>;
  };
};



Kernel

Start with petalinux-config -c kernel

Changes:

  • CONFIG_CPU_IDLE is not set (only needed to fix JTAG Debug issue)

  • CONFIG_CPU_FREQ is not set (only needed to fix JTAG Debug issue)

  • CONFIG_EDAC_CORTEX_ARM64=y

Rootfs

Start with petalinux-config -c rootfs

Changes:

  • CONFIG_i2c-tools=y
  • CONFIG_busybox-httpd=y (for web server app)
  • CONFIG_packagegroup-petalinux-utils(util-linux,cpufrequtils,bridge-utils,mtd-utils,usbutils,pciutils,canutils,i2c-tools,smartmontools,e2fsprogs)
  • CONFIG_e2fsprogs=y (filesystems maintanace)
  • CONFIG_e2fsprogs-dev=y (for filesystems maintanace)
  • CONFIG_e2fsprogs-mke2fs=y (filesystems maintanace)
  • CONFIG_e2fsprogs-dbg=y (filesystems maintanace)
  • CONFIG_e2fsprogs-resize2fs=y (filesystems maintanace)
  • CONFIG_e2fsprogs-tune2fs=y (filesystems maintanace)
  • CONFIG_libss=y (for filesystems maintanace)
  • CONFIG_libcomerr=y (for filesystems maintanace)
  • CONFIG_libext2fs=y (filesystems maintanace)
  • CONFIG_libe2p=y (filesystems maintanace)
  • CONFIG_e2fsprogs-badblocks=y (filesystems maintanace)


Applications

startup

Script App to load init.sh from SD Card if available.

See: \os\petalinux\project-spec\meta-user\recipes-apps\startup\files

webfwu

Webserver application accemble for Zynq access. Need busybox-httpd

Additional Software

Page properties
hiddentrue
idComments
Note:
  • Add description for other Software, for example SI CLK Builder ...
  • SI5338 and SI5345 also Link to:

SI5338

File location <design name>/misc/Si5338/Si5338-*.slabtimeproj

General documentation how you work with these project will be available on Si5338

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision  got to "Change History"  of this page and select older document revision number.

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following
    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

    • Metadata is only used of compatibility of older exports


Scroll Title
anchorTable_dch
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widths2*,*,3*,4*
sortByColumn1
sortEnabledfalse
cellHighlightingtrue


DateDocument RevisionAuthorsDescription

Page info
modified-date
modified-date
dateFormatyyyy-MM-dd

Page info
current-version
current-version
prefixv.

Page info
modified-user
modified-user

  • initial release


Legal Notices

Include Page
IN:Legal Notices
IN:Legal Notices