You should click "File" >"New" > "Project".
...
A pop up "New Project" will
...
appear.
...
Click"Xilinx">"Board Support Package", then next.
...
A new pop up "New Board Support Package Project" will appear
...
.
Scroll pdf title | ||
---|---|---|
| ||
...
Select "standalone" for "Board Support Package OS" and "standalone_bsp_0" for the "Project name".
...
A new pop-up will appear "Board Support Package Settings".
Scroll pdf title | ||
---|---|---|
| ||
...
After this, you should click "standalone" and set "stdin" and "stdout" to "rs232" or "debug_module":
Tip |
---|
Demo program (running on MicroBlaze) will work even in case the UART port is left unconnected: it is not necessary to use a USB/Uart converter or Uart port on a PC, if you are using XMD UART HDL block. |
Scroll pdf title | ||
---|---|---|
| ||
...
After this, you should click drivers to verify that all Microblaze components are supported by the driver in the repository "C:\XilinxProject\TE-EDK-IP"; click "OK" and the pop-up should
...
dissapear.
Scroll pdf title | ||
---|---|---|
| ||
In particular you should also verify that "xmdstub_peripheral" is assigned to none if you desire to use debug_module instead of rs232.
Scroll Title | ||
---|---|---|
| ||
...
After this, you have verified that all Microblaze components are supported by a driver, right click the "standalone_bsp_0" folder in "Project Explorer"
...
.
...
The pop-up "Properties for standalone_bsp_0" should
...
appear.
...
Click "Project References".
...
You should verify that "standalone_bsp_0" references to "reference-TE0300_hw_platform":if is not checked you must check the box.
Scroll pdf title | ||
---|---|---|
| ||
...
Click "OK";
...
After this, you should wait until the SDK compile the added files (C-Build [standalone_bsp_0]) and a message 'Finished building libraries' appears.
Scroll Title | ||
---|---|---|
| ||