Page History

...

Note

Before The mounting the KK0807-02, apply at least approx. 2mm gap filler to the following areas:
The LED D1 must remain free and must not be covered by Gapfiller.DE:
Vor der Montage des KK0807-02 wird auf folgende Stellen mindestens ca. 2mm Gapfiller aufgetragen:
Die Leuchtdiode D1 muss frei bleiben und darf nicht von Gapfiller verdeckt werden.
Image Removedof the heatspreader must be done with care. We do not take over guarantee for self assembly.

Compatibility

This heatspreader can be mounted on all TE0807 Revision 2 (TE0807-02-...).

Accessories

Gap Filler: Berquist GF3500S35-00-60-50CC

Gun: 50CC MANUAL GUN 1:1 RATIO SS95407

Tool: PH1 Philips crosshead torque screwdriver

Assembly

1. Apply Gap Filler in at least approx. 2 mm thickness to the following components:
   
   Image Added
   

   Scroll Pagebreak

   
   
   
2. Align KK0807-02 carefully and press on lightly:
   
   Image Added
   (example TE0745-02 with KK0745-02)
   
   

3. Set the torque screwdriver to 0.5Nm.
   Insert the PH1 Philips crosshead bit and fix it crosswise from below with the four M3x6mm pan-head screws.

   
   Image Added
   
   (example TE0745-02 bottom)