Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The mounting of the heatspreader must be done with care. We do not take over guarantee for self-assembly.

Compatibility

This heatspreader can be mounted on TE0808 Revision 5 (TE0808-05-... ).

Info

This heatspreader can't be mounted on TE0808 Revision 3 & 4 (TE0808-03-... ,  TE0808TE0808-04-... ).

Accessories

Gap Filler: Berquist GF3500S35-00-60-50CC

...

  1. Apply Gap Filler in at least approx. 2 mm thickness to the following components:
    draw.io Diagram
    bordertrue
    diagramNameTE0808-05-Gap-Filler
    simpleViewertrue
    width400
    linksauto
    tbstyletop
    diagramDisplayName
    lboxtrue
    diagramWidth1501
    revision3
    Image Modified

    Scroll Pagebreak


  2. Align KK0808-05 carefully and press on lightly:


  3. Set the torque screwdriver to 0.5Nm / 4,5 inlb.

  4. Insert the PH1 Philips crosshead bit and fix it .

  5. Fix the heatspreader crosswise from below with the four M3x6mm M3 × 6 mm pan-head screws.

    draw.io Diagram
    bordertrue
    diagramNameTE0808-05-KK-Schrrauben
    simpleViewertrue
    width400
    linksauto
    tbstyletop
    diagramDisplayName
    lboxtrue
    diagramWidth916
    revision2


  6. Remove any gap filler squeezed out over the edge of the heat sink with an ESD antistatic cloth.
    Image Removed
    Note

    Make sure that no gap filler gets on the contacts of the connectors.


Include Page
IN:Legal Notices
IN:Legal Notices

...