Page History

When Xilinx SDK openopens, you should:

1) Set the repositories for device driver of custom block used in SDK Microblaze project

...

• click Xilinx "Xilinx Tools" and then "Repositories"

...

...

• after this a pop-up "Preferences" will appears

Scroll pdf title
title Add Reference Repositories for custom driver of custom block/device
Image Removed

...

Scroll pdf title
title Add reference with double indirection (as required by Xilinx SDK)
Image Removed

• click "Apply"
• you should click "OK"
• after this you must wait until the building procedure ended.

2) Create an

...

• You should click "File" >"New" > "Project"

Scroll pdf title
title Xilinx SDK New Project
Image Removed

...

"

...

Hardware Platform Specification

...

Scroll pdf title
title Xilinx SDK new HW Platform Specification
Image Removed

...

Project

...

Scroll pdf title
title Xilinx SDK HW Project New Wizard 1
Image Removed

...

"

...

"

...

Image Removed

...

reference-TE0300

...

_

...

hw

...

_

...

platform"

...

...

3) Create a

...

"

...

Board Support Package

...

Project

...

Scroll pdf title
title New Xilinx Board Support Packages
Image Removed

...

"

...

"

...

standalone_bsp_0

...

Scroll pdf title
title BSP overview
Image Removed

• after this you should click "standalone" and set "stdin" and "stdout" to "rs232" or "debug_module"

...

"

...

Scroll pdf title
title BSP rs232 or debug_module
Image Removed

• after this you should click drivers to verify that all Microblaze components are supported by the driver in the repository C:\XilinxProject\TE-EDK-IP; click "OK" and the pop-up should dissapears;
  

Scroll pdf title
title BSP drivers for Microblaze components
Image Removed

• after you have verified that all Microblaze components are supported by a driver,  right click the "standalone_bsp_0" folder in "Project Explorer" and
• the pop-up "Properties for standalone_bsp_0" should appears
• click "Project References"
• you must verify that "standalone_bsp_0" references to "reference-TE0300_hw_platform":if is not checked you must check the box.

Scroll pdf title
title "standalone_bsp_0" Project References
Image Removed

• click "OK";
• after this, you should wait until the SDK compile the added files (C-Build [standalone_bsp_0]) and a message 'Finished building libraries' appears
  

Image Removed

4) (Re)Create the "Application Project" demo

• You should click "File" >"New" > "Project"
• a pop up "New Project" will appears
• click "Xilinx" > "Application Project", then next
• a new pop up "New Project Application Project" will appear;
• you should set the value of parameters as in the image below

Scroll Title
title ApplicationProject demo creation
Image Removed

• after this clik "Finish"
• a new pop-up will appears "New Project Templates"

Scroll Title
title Available Templates
Image Removed

• in this case select "Empty Apllication" under "Available Templates"
• click "Finish"
• a new "Application Project" named "demo" will be created in the "Project Explorer"
• now you should right click the "demo" folder in "Project Explorer" and select "Project References";
• now you should assure that "reference-TE0300_hw_platform" and "standalon_bsp_0" are both checked; if their box are not already checked, you should check them now;

Scroll Title
title Project References checking
Image Removed

• now the contents of "Project Explorer" should be this one below

Image Removed

• now you should copy the contents of the original demo (all .c and .h files from "TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace\demo\src" already moved in the temporary folder "C:\demo_src_TE") inside the folder "C:\XilinxProject\reference-TE0xxx\SDK\SDK_Workspace\demo\scr" as already do in the figure above;
• now you should select "src" folder in "Project Explorer" > "demo", right click and select "Refresh";

...

...

4) Recreate the "Application Project" "demo"