Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Relevant for newer designs:

AR# 2016.4 PetaLinux: Migrating U-boot configs from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project 68446AR#
Number/LinkDescriptionNote
lwIP modifications for Marvell PHY

lwIP modifications

This project uses a modified version of the lwIP library in order for it to work with the Marvel 88E1510/88E1518 PHYs on the Ethernet FMC.

A function is added to xaxiemacif_physpeed.c for the initialization of the Marvell 88E1510 Ethernet PHY

Patch to use Marvel phy
AR #34290Workaround for the case when running Vivado 2022.2 on newer Linux distributions and the Block Design hangs the complete UI. This is expected to be fixed in future versions.
AR# 55854

Vivado - What can I do to resolve a Vivado crash, exception, or abnormal program termination?


AR#72992

Design Advisory for Zynq UltraScale+ MPSoC/RFSoC: Possible link training failures or data errors on PCIe, SATA, or USB 3.0 protocol links using PS GTR

Important for Designs up to 19.2 and for SATA Gen1 also newer Vivado
AR# 68671

Zynq UltraScale+ MPSoC DisplayPort Controller - What devices are supported with the DisplayPort Controller?


AR# 66652

Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit - Base TRD Monitor requirements

AR# 68006

Design Advisory for Xilinx Design Tools (Vivado, SDAccel, SDSoC) 2016.1 and 2016.2 write_bitstream - Multi-threading might cause configuration memory cells to be set incorrectly

43989

7 Series FPGAs - LVDS_33, LVDS_25, LVDS_18, LVDS inputs & outputs for High Range (HR) and High Performance (HP) I/O banks

AR# 68449


AR#

2016.4 PetaLinux: Migrating Kernel configs from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project

AR# 68440

2016.4 PetaLinux: Migrating Applications from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project

69269Zynq UltraScale+ MPSoC, SDK - Debugging FSBL application does not show source code
AR# 65467Zynq UltraScale+ MPSoC - Boot and Configuration
AR# 66846Method to boot from SD or eMMC from QSPI
AR# 37347

7 Series FPGAs - Will driving the I/Os of an unpowered bank cause damage to the part? Do 7 Series devices support hot swap?


AR# 50802

7 Series - What state are the I/Os in at power up?


AR# 45985

7 Series - How do you limit reverse biasing of VCCO when input is being driven by a 3.3V signal before Vcco is powered?


AR# 47317

Zynq-7000 SoC, ID - Incorrect PS Family IDCODE Value


AR# 47916

Zynq-7000 SoC Devices - Silicon Revision Differences


AR# 59476

Zynq-7000 SoC: SD Programming/Booting Checklist


AR# 70712

Zynq UltraScale+ MPSoC: PL Masters cannot access high DDR address ranges

changed with 18.3 -automatically activated
AR# 66779

Zynq UltraScale+ MPSoC: List of tested SD cards


AR# 57744

Design Advisory for Zynq-7000 SoC - Zynq and QSPI reset requirements when using larger than 16MB flash

Trenz Wiki notes: SPI 32 Bit Addressing

AR# 55854

Vivado - What can I do to resolve a Vivado crash, exception, or abnormal program termination?



Relevant for older designs:

Number/LinkDescriptionNote
AR# 68449

2016.4 PetaLinux: Migrating U-boot configs from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project


AR# 68446

2016.4 PetaLinux: Migrating Kernel configs from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project


AR# 68440

2016.4 PetaLinux: Migrating Applications from 2016.3 PetaLinux project to 2016.4 PetaLinux Yocto based project


AR# 66652

Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit - Base TRD Monitor requirements


AR# 68006

Design Advisory for Xilinx Design Tools (Vivado, SDAccel, SDSoC) 2016.1 and 2016.2 write_bitstream - Multi-threading might cause configuration memory cells to be set incorrectly