Page History
...
Table of contents
| Table of Contents | ||
|---|---|---|
|
...
...
...
The "normal" Vivado project will be generated in the subfolder "/vivado/" after executing scripts (YouTube: TE0720 Project Creation).
There are several options to create the Vivado project from the project delivery. These options are described in Vivado Projects.
...
Zip Name Description
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Currently limitations of functionality
- For modules with dual parallel QSPI implementation only:
Configure Flash with TE::pr_program_flash_binfile does not work. Reason: Select FSBL file is not implemented. Workaround: Use Vivado or SDK GUI and select FSBL manually.
- For modules with dual parallel QSPI implementation only:
Directory structure
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Linux Command Files
...
Settings for the other *.cmd files. Following Settings are avaliable:
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
(optional) Create or open an existing Vivado Lab Tools Project. (Additional TCL functions from Programming and Utilities Group are usable). Settings are done in "design_basic_settings.cmd".
TE-TCL-Extentsions
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
(MicroBlaze only) If "-swapp" is set, the Bitfile with *.elf configuration is used from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>
...
...
Copies current Hardware files and reports from the vivado project to the prebuilt folder, if -used_board <arg> isn't set (Vivado only).
Initialise flash memory with configuration from *_board_files.csv
Programming MCSfile from <design_name>/prebuilt/hardware/<board_file_shortname> to the Flash Device.
After programming device reboot from memory will be done.
If "-used_basefolder_binfile" is set, the MCSfile (*.mcs) from the base folder (<design_name>) is used instead of the prebuilts. Attention: Take only one MCSfile in the basefolder!
(MicroBlaze only) If "-swapp" is set, the MCSfile with *.elf configuration is used from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>
...
Make a Backup from your Project in <design_name>/backup/
Zip-Program Variable must be set in start_settings.cmd. Currently only 7-Zip is supported.
...
Create SDSOC-Workspace. Currently only on some Reference-Designs available. Run [-check_only] option to check SDSOC ready state.
...
Design Environment: Usage
Reference-Design: Getting Started
...
...
...
XDC Conventions
...
Recommended XDC-Names (used for Vivado XDC-options):
...
Backup Block Design as TCL-File
- Backup your Block-Design with TCL-Command "TE::hw_blockdesign_export_tcl" in <design_name>/block_design/
It will be saved as *_bd.tcl
Attention: If subfolder <design_name>/block_design/<board_file_shortname> is defined, it will be saved there!
Only one *.tcl file shoud be in the backup folder respectively the subfolder <board_file_shortname>
Microblaze Firmeware
- Microblaze Firmware (*.elf) can be add to the source folder <design_name>/firmware/<Microblaze IP Instance>.
- For MCS-Core use MCS IP Instance Name. This name must use *mcs* or *syscontrol* in the name.
Software Design
HSI: Generate predefined software from libraries
- To generate predefinde software from libraries, run "TE::sw_run_hsi" on Vivado TCL-Console
- All programs in in <design_name>/sw_lib/apps_list.csv are generated automaticly
- Supported are local application libaries from <design_name>/sw_lib/sw_apps or the most Xilinx SDK Applications found in %XILDIR%/SDK/%VIVADO_VERSION%/data/embeddedsw/lib/sw_app
SDK: Create user software project
- To start SDK project, run "TE::sw_run_sdk" on Vivado TCL-Console
Include Hardware-Definition-File, Bit-file and local Software-libraries from <design_name>/sw_lib/sw_apps - To use Hardware-Definition-File, Bit-file from prebuilt folder without building the vivado hardware project, run "sdk_create_prebuilt_project_guimode.cmd" or type "TE::sw_run_sdk -prebuilt_hdf <board_number>" on Vivado-TCL-Console
- To open an existing SDK-project without update HDF-Data, type "TE::sw_run_sdk -open_only" on Vivado-TCL-Console
Advanced Usage
Attention not all features of the TE-Scripts are supported in the advanced usage!
User defined board part csv file
To modifiy current board part csv list, make a copy of the original csv and rename with suffix "_mod.csv", ex.TE0782_board_files.csv as TE0782_board_files_mod.csv. Scripts used modified csv instead of the original file.
See Chapter Board Part Files for more information.
User defined Settings
Vivado settings:
Vivado Project settings (corresponding TCL-Commands) can be saved as a user defined file "<design_name>/settings/project_settings.tcl". This file will be loaded automatically on project creation.
Script settings:
Additional script settings (only some predefined variables) can be saved as a user defined file "<design_name>/settings/development_settings.tcl". This file will be loaded automatically on script initialisation.
ZIP ignore list:
Files which should not be added in the backup file can be can be defined in this file: "<design_name>/settings/zip_ignore_list.tcl". This file will be loaded automaticaly on script initialisation.
SDSOC settings:
SDSOC settings will are deposited on the following folder: "<design_name>/settings/sdsoc"
User defined TCL Script
TCL Files from "<design_name>/settings/usr" will be load automaticaly on script initialisation.
SDSOC-Template
SDSOC description and files to generate SDSoC project are deposited on the following folder: "<design_name>/settings/sdsoc"
HDL-Design
HDL files can be saved in the subfolder "<design_name>/hdl/" or "<design_name>/hdl/<shortname>" and all subfolders of "<design_name>/hdl/<shortname>". They will be loaded automatically on project creation. Available formats are *.vhd, *.v and *.sv. A own top-file must be specified with the name "<design_name>_top.v" or "<design_name>_top.vhd".
To set file attributes, the file name must include "_simonly_" for simulation only and "_synonly_" for synthese only.
RTL-IP-cores (*.xci). can be saved in the subfolder "<design_name>/hdl/xci" or "<design_name>/hdl/xci/<shortname>". They will be loaded automatically on project creation.
Checklist / Troubleshoot
- Are you using exactly the same Vivado version? If not then the scripts will not work, no need to try.
- Ary you using Vivado in Windows PC? Vivado works in Linux also, but the scripts are tested on Windows only.
- Is you PC OS Installation English? Vivado may work on national versions also, but there have been known problems.
- Are space character on the project path? Somtimes TCL-Scripts can't handle this correctly. Remove spaces from project path.
- Did you have the newest reference design build version? Maybe it's only a bug from a older version.
- Check <design_name>/v_log/vivado.log? If no logfile exist, wrong xilinx paths are set in design_basic_settings.cmd
- On project creation process old files will be deleted. Sometimes the access will be denied by os (synchronisiation problem) and the scripts canceled. Please try again.
- If nothing helps, send a mail to Trenz Electronic Support (support[at]trenz-electronic.de) with subject line "[TE-Reference Designs] ", the complete zip-name from your reference design and the last log file (<design_name>/v_log/vivado.log)
References
- Vivado Design Suite User Guide - Getting Started (UG910)
- Vivado Design Suite User Guide - Using the Vivado IDE (UG893)
- Vivado Design Suite User Guide - I/O and Clock Planning (UG899)
- Vivado Design Suite User Guide - Programming and Debugging (UG908)
- Zynq-7000 All Programmable SoC Software Developers Guide (UG821)
- SDSoC Environment User Guide - Getting Started (UG1028)
- SDSoC Environment - User Guide (UG1027)
- SDSoC Environment User Guide - Platforms and Libraries (UG1146)
Document Change History
To get content of older revision got to "Change History" of this page and select older revision number.
| HTML |
|---|
<!--
Generate new entry:
1:add new row below first
2:Copy Page Information Macro(date+user) Preview, Page Information Macro Preview, Vivado Version(or update)to the empty row
3.Update Metadate =Page Information Macro Preview+1
--> |
...
...
Programming FPGA or Flash Memory with prebuilt Files:
7. Connect your Hardware-Modul with PC via JTAG.
With Batch-file:
8. (optional) Zynq-Devices Flash Programming (*.bin):
Run “program_flash_binfile.cmd”
9. (optional) FPGA-Device Flash Programming (*.mcs):
Run “program_flash_mcsfile.cmd”
10. (optional) FPGA-Device Programming (*.bit):
Run “program_fpga_bitfile.cmd”
With Vivado/Labtools TCL-Console:
11. Run “vivado_open_existing_project_guimode.cmd” or “labtools_open_project_guimode.cmd” to open Vivado or LabTools
12. (optional) Zynq-Devices Flash Programming (*.bin):
Type “TE::pr_program_flash_binfile -swap <app_name>” on Vivado TCL-Console
Used *.bin from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>
13. (optional) FPGA-Device Flash Programming (*.mcs):
Type “TE:: pr_program_flash_mcsfile -swap <app_name>” on Vivado TCL-Console
Used *.mcs from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>
14. (optional) FPGA-Device Programming (*.bit):
Type “TE:: pr_program_jtag_bitfile -swap <app_name>” on Vivado TCL-Console
Used *.bit from <design_name>/prebuilt/boot_images/<board_file_shortname>/<app_name>
Basic Design Settings
Project Configuration
- Unzip project files
- Rename basefolder (basefolder name is used as project name)
- Edit design_basic_settings.cmd
- Select the correct Xilinx Program path (See: Windows Command Files → design_basic_settings.cmd)
- Select the correct board part number for your PCB (See: Windows Command Files → design_basic_settings.cmd)
- Other settings are optional (See: Windows Command Files → design_basic_settings.cmd)
- Excecute vivado_create_project_guimode.cmd or vivado_create_project_batchmode.cmd to generate a vivado project with the predefined Block Design from the Block Design folder
- Open Vivado with vivado_open_existing_project_guimode.cmd (if you use vivado_create_project_guimode.cmd on step 4, you didn't need this)
- Open the Block Design and create your own design inside this Block Design.
- Backup your Block Design as tcl-script: Type "TE::hw_blockdesign_export_tcl" on Vivado Tcl Console. The old one will be overwritten.
- Build your Design...
Initialise TE-scripts on Vivado/LabTools
- Variant 1 (recommended):
- Start the project with the predefined command file (vivado_open_existing_project_guimode.cmd) respectively LabTools with (labtools_open_project_guimode.cmd)
- Variant 2:
- Create your own Initialisation Button on the Vivado GUI:
- Tools → Customize Commands → Customize Commands...
- Push
- Type Name ex.: Init Scripts
- Press Enter
- Select Run command and insert:
- for Vivado: cd [get_property DIRECTORY [current_project]]; source -notrace "../scripts/reinitialise_all.tcl"
- for LabTool: cd [pwd]; source -notrace "../scripts/reinitialise_all.tcl"
- Press Enter
- A new Button is shown on the Vivado Gui: All Scripts are reinitialised, if you press this Button.
- Create your own Initialisation Button on the Vivado GUI:
- Variant 3:
- Reinitialise Script on Vivado TCL-Console:
- Type: source ../scripts/reinitialise_all.tcl
- Type: source ../scripts/reinitialise_all.tcl
- Reinitialise Script on Vivado TCL-Console:
Use predefined TE-Script functions
- Variant 1 (recommended):
- Typ function on Vivado TCL Console, ex.: TE::help
- TE::help
- Show all predefined TE-Script functions.
- TE:<functionname> -help
- Show short description of this function.
- Attention: If -help argument is set, all other args will be ignored.
- Variant 2:
- Create your own function Button on the Vivado GUI:
- Tools → Customize Commands → Customize Commands...
- Push +
- Type Name ex.: Run SDK
- Press Enter
- Select Run command and insert function:
- Variante 1 (no Vivado request window for args):
- insert function and used args, ex.: TE::sw_program_zynq -swapp hello_world
- Variant 2 (Vivado request window for args):
- insert function, ex.:TE::sw_program_zynq
- Press Define Args...
- For every arg:
- Push
- Typ Name, Comment, Default Value and set optional
- Press Enter
- Example for args:
- Push
- Index, Key Name, -swapp,
- Push
- Appname, Arg, hello_world,
- Push
- Push
- Variante 1 (no Vivado request window for args):
- Press Enter
- A new Button is shown on the Vivado Gui.
- Create your own function Button on the Vivado GUI:
Hardware Design
Board Part Files
See also TE Board Part Files
Structure Board Parts
Board Parts are located on subfolder "board_files", with the name of the special board. Revisions are splitt in the subfolder of the board part <boardpart_name><version>
Every Version of a Board Parts consists of four files:
- board.xml
- part0_pins.xml
- preset.xml
- picture.jpg or picture.png
Board Part Carrier Extension
Board Part Carrier Extensions are a TCL-Scripts, which can be sourced in Vivado Block Design. Thy are used with TE-Scripts only. It contains additional settings of PS-System for special carrier-board, if no special Board part file exists.
Board Part Carrier Extensions are located on subfolder "board_files/carrier_extension/" with file name *_preset.tcl.
Use Reference Designs or Vivado TCL-Console(TE-Script extensions, see Initialise TE-scripts on Vivado/LabTools): TE::hw_blockdesign_create_bd -help to create PS with full settings. Or source the TCL file manually direct after "Run Block Automation"
Board Part CSV Description
Board Part csv file is used for TE-Scripts only.
...
"<Flash Name from Vivado>|<SPI Interface>|<Flash Size in MB>" or "NA" , NA is not defined, ex. s25fl256s-3.3v-qspi-x4-single|SPIx4|32
Flash Name is used for programming, SPI Interface and Size in MB is used for *.mcs build.
...
Block Design Conventions
...
Recommended BD-Names (currently importend for some TE-Scripts):
...
| ||
| Utilities | ||
| TE::util_zip_project | [-save_all] [-remove_prebuilt] [-manual_filename <arg>] [-help] | Make a Backup from your Project in "<project folder>/backup/" Zip-Program Variable must be set in start_settings.cmd. Currently only 7-Zip is supported. |
| TE::util_editor | [-file <arg>] [-help] | open file with editor which is set on "TE_EDITOR" Enviroment variable |
| TE::util_terminal | [-help] | linux only. open new terminal |
| TE::util_package_length | [-help] | Export Package IO length information to *.csv on the doc folder |
| TE::util_svn | [-status] [-update] [-add <arg>] [-remove <arg>] [-commit <arg>] [-commit\] [-help] | start svn commands on the current project(project must be under SVN Version) On Win OS: Need Tortouise SVN with command line tools installation On Linux: Need subversion installed, for example sudo apt-get install subversion -y |
| Beta Test (Advanced usage only!) | ||
| ||
| TE::ADV::beta_hw_remove_board_part | [-permanent] [-help] | Reconfigure Vivado project as project without board part. Generate XDC-File from board part IO definitions and change ip board part properties. No all IPs are supported. |
| TE::ADV::beta_hw_export_rtl_ip | \[-help\] | Save IPs used on rtl designs as *.xci in "<project folder>hdl/xci". If sub folder "<board_file_shortname>" is defined this will be saved there. |
| TE::ADV::beta_hw_create_board_part | \[-series <arg>\] \[-all\] \[-preset\] \[-existing_ps\] \[-help\] | create PS or preset.xml PS settings from external tcl scripts |
| TE::ADV::beta_hw_export_binary | \[-mode <arg>\] \[-app <arg>\] \[-folder <arg>\] \[-all\] \[-help\] | export prebuilt files to an given folder (based from project folder). Special folder is used, if empty |
Design Environment: Usage
| Scroll Ignore | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
Reference-Design: Getting Started
- Install Xilinx Vivado Design Suite or Xilinx Vivado Webpack (free license for some FPGA only: see http://www.xilinx.com/products/design-tools/vivado/vivado-webpack.html)
(optional) Install Xilinx Vivado LabTools (Lab Edition) - Automatically configuration of the reference-designs (only with 2018.3 scripts and newer):
- Run "_create_win_setup.cmd" or "_create_linux_setup.sh"
- select "module selection guide" and follow instructions.
- "design_basic_settings.cmd" will be configured over this menu
- select "module selection guide" and follow instructions.
- Run "_create_win_setup.cmd" or "_create_linux_setup.sh"
- (optional for 18.3 or newer) Manual Configure the reference-design (Note: batch/bash files works only in the basefolder of the project, use _create_*_setup.cmd/sh or copy manually ):
1. Open “design_basic_settings.cmd” with a text-editor:
a. Set correct Xilinx Environment:
@set XILDIR=C:/Xilinx
@set VIVADO_VERSION=2023.2
Program settings will be search in :
%XILDIR%/VIVADO/%VIVADO_VERSION%/
%XILDIR%/Vivado_Lab/%VIVADO_VERSION%/
%XILDIR%/Vitis/%VIVADO_VERSION%/
Example directory: c:/Xilinx/Vivado/2023.2/
Attention: Scripts are supported only with predefined Vivado Version!
b. Set the correct module part-number:
@set PARTNUMBER=x
You found the available Module Numbers in "<project folder>/board_files/<board_series>_board_files.csv"
c. Set Application name (for programming with batch-files only):
@set SWAPP=NA
NA (No Software Project) used *.bit or *.mcs from "<project folder>/prebuilt/hardware/<board_file_shortname>"
<app_name> (Software Project) used *.bit or *.mcs or *.bin from "<project folder>/prebuilt/boot_images/<board_file_shortname>/<app_name>" - Create all prebuilt files in one step:
2. Run “design_run_project_batchmode.cmd” - (optional to Step 2) Create all prebuilt files in single steps:
3. Run “vivado_create_project_guimode.cmd”:
A Vivado Project will be create and open in ./vivado
4. Type “TE::hw_build_design” on Vivado TCL-Console:
Run synthesis, Implement and create Bitfile and optional MCSfile
5. Type “TE::sw_run_vitis -all -no_gui” on Vivado TCL-Console:
Create all Software Applications from "<project folder>/sw_lib/apps_list.csv"
6. (optional to Step 5) Type “TE::sw_run_vitis ” on Vivado TCL-Console:
Create a SDK Project in "<project folder>/workspace/sdk"
Include Hardware-Definition-File, Bit-file and local Software-libraries from "<project folder>/sw_lib/sw_apps" Programming FPGA or Flash Memory with prebuilt Files:
7. Connect your Hardware-Modul with PC via JTAG.
With Batch-file:
8. (optional) Zynq-Devices Flash Programming (*.bin) or FPGA-Device Flash Programming (*.mcs):
Run “program_flash.cmd”
10. (optional) FPGA-Device Programming (*.bit):
Run “program_fpga_bitfile.cmd”
With Vivado/Labtools TCL-Console:
11. Run “vivado_open_existing_project_guimode.cmd” or “labtools_open_project_guimode.cmd” to open Vivado or LabTools
12. (optional) Zynq-Devices Flash Programming (*.bin):
Type “TE::pr_program_flash -swap <app_name>” on Vivado TCL-Console
Used .bin(Zynq)/.mcs(native FPGA) "<project folder>/prebuilt/boot_images/<board_file_shortname>/<app_name>"
13. (optional) FPGA-Device Programming (*.bit):
Type “TE:: pr_program_jtag_bitfile -swap <app_name>” on Vivado TCL-Console
Used *.bit from "<project folder>/prebuilt/boot_images/<board_file_shortname>/<app_name>"
Basic Design Settings
Initialise TE-scripts on Vivado/LabTools
- Variant 1 (recommended):
- Start the project with the predefined command file (vivado_open_existing_project_guimode.cmd) respectively LabTools with (labtools_open_project_guimode.cmd)
- Variant 2:
- Create your own Initialisation Button on the Vivado GUI:
- Tools → Customize Commands → Customize Commands...
- Push
- Type Name ex.: Init Scripts
- Press Enter
- Select Run command and insert:
- for Vivado: cd [get_property DIRECTORY [current_project]]; source -notrace "../scripts/reinitialise_all.tcl"
- for LabTool: cd [pwd]; source -notrace "../scripts/reinitialise_all.tcl"
- Press Enter
- A new Button is shown on the Vivado GUI: All Scripts are reinitialised, if you press this Button.
- Create your own Initialisation Button on the Vivado GUI:
- Variant 3:
- Reinitialise Script on Vivado TCL-Console:
- Type: source ../scripts/reinitialise_all.tcl
- Type: source ../scripts/reinitialise_all.tcl
- Reinitialise Script on Vivado TCL-Console:
Use predefined TE-Script functions
- Variant 1 (recommended):
- Type function on Vivado TCL Console, ex.: TE::help
- TE::help
- Show all predefined TE-Script functions.
- TE:<function_name> -help
- Show short description of this function.
- Attention: If -help argument is set, all other args will be ignored.
- Variant 2:
- Create your own function Button on the Vivado GUI:
- Tools → Customize Commands → Customize Commands...
- Push +
- Type Name ex.: Run SDK
- Press Enter
- Select Run command and insert function:
- Variante 1 (no Vivado request window for args):
- insert function and used args, ex.: TE::sw_program_zynq -swapp hello_world
- Variant 2 (Vivado request window for args):
- insert function, ex.:TE::sw_program_zynq
- Press Define Args...
- For every arg:
- Push
- Type Name, Comment, Default Value and set optional
- Press Enter
- Example for args:
- Push
- Index, Key Name, -swapp,
- Push
- Appname, Arg, hello_world,
- Push
- Push
- Variante 1 (no Vivado request window for args):
- Press Enter
- A new Button is shown on the Vivado GUI.
- Create your own function Button on the Vivado GUI:
Environment Variables
Local
| Files | Note |
|---|---|
| <project folder>/design_basic_settings.cmd/sh | General local variables for project generation |
| <project folder>/settings/design_settings.tcl | Design setting like Device Filter, UART Speed and Port |
| <project folder>/settings/development_setting.tcl | Development settings which can manipulate execution steps |
Global
| Name | Value | Note |
|---|---|---|
| TE_SERIAL_PS | <path> | Internal usage only |
| TE_COM | <path> | path to putty, in case it's not installed global |
| TE_TIMEOUT | <time> | timeout for jobs, unit in minutes, def 120 |
| TE_RUNNING_JOBS | <count> | max jobs (depends on available CPUs) which can be started by Vivado, default 4 |
| TE_WSL_USAGE | 1/0 | 1 use Windows programs for some external processes |
| TE_GUI_DISABLED | 1/0 |
|
| TE_EDITOR | <name> | Text Editor which should be started for some TE functions |
| TE_PLX_SSTATE_CACHE_DOWNLOAD | <path> | Local version of SSTATE, file avialable on the download area from Xilinx petalinux, example: TE_PLX_SSTATE_CACHE_DOWNLOAD="~/design/sstate-cache/downloads_2023.2/downloads" |
| PLX_SSTATE_CACHE_AARCH64 | <path> | Local version of SSTATE for U+ Zynq and Versal, file avialable on the download area from Xilinx petalinux, example: TE_PLX_SSTATE_CACHE_DOWNLOAD="~/design/sstate-cache/downloads_2023.2/downloads" |
| PLX_SSTATE_CACHE_ARM | <path> | Local version of SSTATE for Zynq 7000, file avialable on the download area from Xilinx petalinux, example: PLX_SSTATE_CACHE_ARM="~/design/sstate-cache/sstate_arm_2023.2/arm" |
| PLX_SSTATE_CACHE_MB_FULL | <path> | Local version of SSTATE for Microblaze, file avialable on the download area from Xilinx petalinux, example: PLX_SSTATE_CACHE_ARM="~/design/sstate-cache/sstate_mb_full_2023.2/mb_full" |
| PLX_SSTATE_CACHE_MB_LITE | <path> | currently not supported |
Hardware Design
Board Part Files
More details see TE Board Part Files
Structure Board Parts
Board Parts are located on subfolder "board_files", with the name of the special board. Revisions are split in the subfolder of the board part <boardpart_name><version>
Every Version of a Board Parts consists of four files:
- board.xml
- part0_pins.xml
- preset.xml
- picture.jpg or picture.png
Board Part or Design Extension
Board Part Extensions are TCL-Scripts, which can be sourced in Vivado Block Design. Thy are usable with TE-Scripts only. It contains additional settings of PS-settings or special carrier-board design changes.
Use Reference Designs or Vivado TCL-Console (TE-Script extensions, see Initialise TE-scripts on Vivado/LabTools): TE::hw_blockdesign_create_bd -help to create PS with full settings. Or source the TCL file manually direct after "Run Block Automation"
Possible:
- Board Part PS settings are located on subfolder "board_files/preset_extension/" with file name *_preset.tcl.
- Design modifications are located on subfolder "board_files/bd_mod/" with file name *_bd.tcl.
Board Part CSV Description
Board Part csv file is used for TE-Scripts only.
| Name | Description | Value |
|---|---|---|
| ID | ID to identify the board variant of the module series, used in TE-Scripts | Number, should be unique in csv list |
| PRODID | Product ID | Product Name |
| PARTNAME | FPGA Part Name, used in Vivado and TE-Scripts | Part Name, which is available in Vivado, ex. xc7z045ffg900-2 |
| BOARDNAME | Board Part Name, used in Vivado and TE-Scripts | set Board Part Name or "NA", which is available in Vivado, NA is not defined to run without board part and board part ex. trenz.biz:te0782-02-45:part0:1.0 |
| SHORTNAME | Subdirectory name, used for multi board projects to get correct sources and save prebuilt data | name to save prebuilt files or search for sources |
| ZYNQFLASHTYP | Flash type used for programming Zynq-Devices via SDK-Programming Tools (program_flash) | "qspi_single" or "NA", NA is not defined |
| FPGAFLASHTYP | Flash type used for programming Devices via Vivado/LabTools | "<Flash Name from Vivado>|<SPI Interface>|<Flash Size in MB>" or "NA" , NA is not defined, ex. s25fl256s-3.3v-qspi-x4-single|SPIx4|32 Flash Name is used for programming, SPI Interface and Size in MB is used for *.mcs build. For Zynq and ZynqMO only Flash name is necessary |
| PCB_REV | Supported PCB Revision | "<supported PCB Revision>|<supported PCB Revision>", for ex. "REV02" or "REV03|REV02" |
| DDR_SIZE | Size of Module DDR | use GB or MB, for ex. "2GB" or "512MB" or "NA" if not available |
| FLASH_SIZE | Size of Module Flash | use MB, for ex. "64MB" or "NA" if not available |
| EMMC_SIZE | Size of Module EMMC | use GB or MB, for ex. "4GB" or "NA" if not available |
| OTHERS | Other module relevant changes to distinguish assembly variants | |
| NOTES | Additional Notes | |
| DESIGN | Specify the allowed variants for different designs. | see also <design folder>\settings\design_settings.tcl |
| CONFIG_SW_EXTPLL | Optional parameter to support different PLL Versions which can be programmed Replace all files with the same file name on sw_lib folder with the specified one | relativ path to the source file, for example "./misc/PLL/SI5345_D/te_Si5345-Registers.h" |
Block Design Conventions
- Only one Block-Design per project is supported
Recommended BD-Names (currently importend for some TE-Scripts):
Name Description zsys Identify project as Zynq Project with processor system (longer name with *zsys* are supported too) zusys Identify project as UltraScaleZynq Project with processor system (longer name with *zusys* are supported too) msys Identify project as Microblaze Project with processor system (longer name with *msys* are supported too) fsys Identify project as FPGA-fabric Project without processor system (longer name with *fsys* are supported too) - Create Basic Block Design with PS Board-Part Preset and Carrier-Board extended settings (only if subfolder carrier_extension with tcl files is available), use TE::hw_blockdesign_create_bd -help
XDC Conventions
- All *.xdc from <project folder>/constrains/ are load into the vivado project on project creation.
Attention: If subfolder <project folder>/constrains/<board_file_shortname> is defined, it will be used the subfolder constrains only for this module! Recommended XDC-Names (used for Vivado XDC-options):
Property Name part Description Set Processing Order *_e_* set to early *_l_* set to late set to normal Set Used In *_s_* used in synthesis only *_i_* used in implement only used in both, synthesis and implement
Backup Block Design as TCL-File
- Backup your Block-Design with TCL-Command "TE::hw_blockdesign_export_tcl" in <project folder>/block_design/
It will be saved as *_bd.tcl
Attention: If subfolder <project folder>/block_design/<board_file_shortname> or <project folder>/block_design/PCB Revision> is defined, it will be saved there!
Only one *.tcl file should be in the backup folder respectively the subfolder <board_file_shortname>
Microblaze Firmware
- Microblaze Firmware (*.elf) can be add to the source folder <project folder>/firmware/<Microblaze IP Instance>.
- For MCS-Core use MCS IP Instance Name. This name must use *mcs* or *syscontrol* in the name.
Software Design
Vitis: Generate predefined software from libraries
- To generate predefined software from libraries, run "TE::sw_run_vitis -all -no_gui" on Vivado TCL-Console
- All programs in in <project folder>/sw_lib/apps_list.csv are generated automaticity
- Supported are local application libraries from <project folder>/sw_lib/sw_apps or the most Xilinx SDK Applications found in %XILDIR%/SDK/%VIVADO_VERSION%/data/embeddedsw/lib/sw_app
VITIS: Create user software project
- To start SDK project, run "TE::sw_run_vitis" on Vivado TCL-Console or run "TE::sw_run_vitis -workspace_only" on Vivado TCL-Console
Include Hardware-Definition-File (XSA), Bit-file and local Software-libraries from "<project folder>/sw_lib/sw_apps" - To use Hardware-Definition-File, Bit-file from prebuilt folder without building the vivado hardware project, run "sdk_create_prebuilt_project_guimode.cmd" or type "TE::sw_run_vitis -prebuilt_xsa <board_number>" on Vivado-TCL-Console
- To open an existing SDK-project without update HDF-Data, type "TE::sw_run_vitis -gui_only" on Vivado-TCL-Console
Advanced Usage
Attention not all features of the TE-Scripts are supported in the advanced usage!
User defined board part csv file
To modify current board part csv list, make a copy of the original csv and rename with suffix "_mod.csv", ex.TE0782_board_files.csv as TE0782_board_files_mod.csv. Scripts used modified csv instead of the original file.
See Chapter Board Part Files for more information.
User defined Settings
- Vivado settings:
- Vivado Project settings (corresponding TCL-Commands) can be saved as a user defined file "<project folder>/settings/project_settings.tcl". This file will be loaded automatically on project creation.
- Vivado Project settings (corresponding TCL-Commands) can be saved as a user defined file "<project folder>/settings/project_settings.tcl". This file will be loaded automatically on project creation.
- Script settings:
- Additional script settings (only some predefined variables) can be saved as a user defined file "<project folder>/settings/development_settings.tcl". This file will be loaded automatically on script initialisation.
- Design settings:
- Additional script settings (only some predefined variables) can be saved as a user defined file "<project folder>/settings/design_settings.tcl". This file will be loaded automatically on script initialisation.
- ZIP ignore list:
- Files which should not be added in the backup file can be can be defined in this file: "<project folder>/settings/zip_ignore_list.tcl". This file will be loaded automatically on script initialisation.
- SDSOC settings:
- SDSOC settings will are deposited on the following folder: "<project folder>/settings/sdsoc"
User defined TCL Script
TCL Files from "<project folder>/settings/usr" will be load automatically on script initialisation.
SDSOC-Template
SDSOC description and files to generate SDSoC project are deposited on the following folder: "<project folder>/settings/sdsoc"
HDL-Design
HDL files can be saved in the subfolder "<project folder>/hdl/" as single files or <project folder>/hdl/folder/ and all subfolders or "<project folder>/hdl/<shortname>" and all subfolders of "<project folder>/hdl/<shortname>". They will be loaded automatically on project creation. Available formats are *.vhd, *.v and *.sv. A own top-file must be specified with the name "<project folder>_top.v" or "<project folder>_top.vhd".
To set file attributes, the file name must include "_simonly_" for simulation only and "_synonly_" for synthesis only.
IP-cores (*.xci). can be saved in the subfolder "<project folder>/hdl/xci" or "<project folder>/hdl/xci/<shortname>". They will be loaded automatically on project creation.
IP -TCL description (*_preset.tcl). can be saved in the subfolder "<project folder>/hdl/tcl" or "<project folder>/hdl/tcl/<shortname>". They will be loaded automatically on project creation.
- *_preset.tcl must include
- TCL part for IP creation: create_ip -name ...
- TCL part for IP configuration: set_property -dict...
- TCL part for IP target generation: generate_target {instantiation_template} .....
- TCL part for IP creation: create_ip -name ...
Checklist / Troubleshoot
| Scroll Ignore | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
- Are you using exactly the same Vivado version? If not then the scripts will not work, no need to try.
- Are you using Vivado in Windows PC? Vivado works in Linux also, but the scripts are tested on Windows only.
- Is you PC OS Installation English? Vivado may work on national versions also, but there have been known problems.
- Win OS only: Use short path name, OS allows only 256 characters in normal path.
- Linux OS only: Use bash as shell and add access rights to bash files. Check with "ls ls /bin/sh". It should be display: /bin/sh -> bash. Access rights can be changed with "chmod"
- Are space character on the project path? Sometimes TCL-Scripts can't handle this correctly. Remove spaces from project path.
- Did you have the newest reference design build version? Maybe it's only a bug from a older version.
- Check <project folder>/v_log/vivado.log? If no logfile exist, wrong xilinx paths are set in design_basic_settings.cmd
- On project creation process old files will be deleted. Sometimes the access will be denied by os (synchronisation problem) and the scripts cancelled. Please try again.
- If nothing helps, send a mail to Trenz Electronic Support (support[at]trenz-electronic.de) with subject line "[TE-Reference Designs] ", the complete zip-name from your reference design and the last log file (<project folder>/v_log/vivado.log)
References
| Scroll Ignore | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
- Vivado Design Suite User Guide - Getting Started (UG910)
- Vivado Design Suite User Guide - Using the Vivado IDE (UG893)
- Vivado Design Suite User Guide - I/O and Clock Planning (UG899)
- Vivado Design Suite User Guide - Programming and Debugging (UG908)
- Zynq-7000 All Programmable SoC Software Developers Guide (UG821)
- SDSoC Environment User Guide - Getting Started (UG1028)
- SDSoC Environment - User Guide (UG1027)
- SDSoC Environment User Guide - Platforms and Libraries (UG1146)
Document Change History
| Scroll Ignore | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||
To get content of older revision got to "Change History" of this page and select older revision number.
| HTML |
|---|
<!--
Generate new entry:
1:add new row below first
2:Copy Page Information Macro(date+user) Preview, Page Information Macro Preview, Vivado Version(or update)to the empty row
3.Update Metadate =Page Information Macro Preview+1
--> |
| Date | Revision | Vivado Version | Authors | Description | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| 2022.2 |
| working in process | ||||||||||||||||||||||
2023-08-15 | v.176 | 2022.2 | John Hartfiel | Last Vivado 2022.2 supported project delivery version | ||||||||||||||||||||||
| 2023-02-06 | v.171 | 2021.2 | John Hartfiel | Last Vivado 2021.2 supported project delivery version | ||||||||||||||||||||||
| 2021-05-06 | v.162 | 2020.2 | Manuela Strücker | Last Vivado 2020.2 supported project delivery version | ||||||||||||||||||||||
| 2020-11-26 | v.157 | 2019.2 | John Hartfiel | Last Vivado 2019.2 supported project delivery version | ||||||||||||||||||||||
| 2019-12-18 | v.148 | 2018.2 | John Hartfiel | Last Vivado 2018.3 supported project delivery version | ||||||||||||||||||||||
| --- | --- | 2018.2 | John Hartfiel | Last Vivado 2018.2 supported project delivery version
| ||||||||||||||||||||||
2019-07-10 | v.142 | 2017.4 | John Hartfiel | Last Vivado 2017.4 supported project delivery version | ||||||||||||||||||||||
| 2017-11-03 | v.134 | 2017.2 | John Hartfiel | Last Vivado 2017.2 supported project delivery version | ||||||||||||||||||||||
| 2017-09-12 | v.131 | 2017.1 | John Hartfiel | Last Vivado 2017.1 supported project delivery version |
...
...
...
...
Overview
Content Tools