...
The Trenz Electronic TEMB0005 is an industrial-grade a carrier for the module TEM00005. The carrier is equipped with a Gigabit LAN socket, a FTDI JTAG/UART to USB2.0 interface, two different Samtec B2B Connectors, three Tiger Claw Samtec Dual Socketssolution, three low speed and one high speed CRUVI B2B Connectors, a PMod Connector, a pin header and a FTDI. Find more information in the FTDI sections.
Refer to http://trenz.org/temb0005-info for the current online version of this manual and other available documentation.
...
- Modules
- RAM/Storage
- On Board
- FT2232H FTDI
- 4x User LEDLEDs
- 2x Push ButtonButtons
- 2x MEMS Oscillators
- Interface
- 1x Samtec Razor Beam (SS5) B2B Connector
- 1x Samtec Razor Beam (SS4) B2B High Speed CRUVI Connector
- 3x Samtec Tiger Claw Dual SocketSamtec Low Speed CRUVI Connectors
- 1x PMod SMD (2x6) Connector
- 1x SMD Header (1x6)
- 1x RJ45 LAN Socket
- 1x Micro USB2.0 Connector
- Power
- Dimension
- Notes
...
| Scroll Title |
|---|
| anchor | Figure_OV_BD |
|---|
| title | TEMB0005 block diagram |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| |
|---|
| diagramName | TEMB0005_OV_BD |
|---|
| simpleViewer | false |
|---|
| width | 639 |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| diagramWidth | 640 |
|---|
| revision | 311 |
|---|
|
|
| Scroll Only |
|---|
|
|
Main Components
...
| Scroll Title |
|---|
| anchor | Figure_OV_MC |
|---|
| title | TEMB0005 main components |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| |
|---|
| diagramName | TEMB0005_OV_MC |
|---|
| simpleViewer | false |
|---|
| width | 639 |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| diagramWidth | 641 |
|---|
| revision | 57 |
|---|
|
|
| Scroll Only |
|---|
|
|
- SMD Header 6x1, J3
- RJ45 LAN Socket, J1
- B2B Razor Beam Connector, J11
- Barrel Jack, J4
- Green LEDs, D1...4
- User Push Button, S2
- PMod 2x6 SMD Host Socket, J9
- FT2232H FTDI, U1
- Reset Push Button, S1
- Micro USB2.0 Socket, J2
- Red LED (PG_DCDC), D8
- Green LED (5VIN), D5
- B2B Mezzanine ConnectorHigh Speed CRUVI Connectors, J5
- Dual Wipe SocketLow Speed CRUVI Connectors, J8Dual Wipe Socket
- Low Speed CRUVI Connectors, J7
- Dual Wipe SocketLow Speed CRUVI Connectors, J6
Initial Delivery State
...
| Scroll Title |
|---|
| anchor | Table_OV_RST |
|---|
| title | Reset process. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Signal | B2B | Connected to | Note | RESET | J11- 54 | B2B, J5 | General Reset |
|---|
| M_RESET | J11- 11 | Push Button, S1 | Module Reset |
|
Signals, Interfaces and Pins
| EN_VADJ | J11-110 | DCDC, U6 | pull-down, input from module | | SEL_VADJ | J11-108 | DCDC, U6 | pull-up, input from module.
'low' → 1.8V,
'high'→ 2.5V |
|
Signals, Interfaces and Pins
| Page properties |
|---|
|
| Page properties |
|---|
|
Notes : - For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
- For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
|
Board to Board (B2B) I/Os
FPGA bank number and number of I/O signals connected to the B2B connector:The carrier TEMB0005 is equipped with a Samtec (SS4) B2B Connector. More information in the following table.
| Scroll Title |
|---|
| anchor | Table_SIP_B2B |
|---|
| title | General PL I/O to B2B connectors information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
FPGA BankB2B Connector| Interface | I/O Signal Count |
|---|
Voltage Level |
USB2.0 Socket
...
| anchor | Table_SIP_USB2 |
|---|
| title | General PL I/O to B2B connectors information |
|---|
|
|---|
J11
| JTAG | 4x Single Ended | FTDI, U1 |
| | MSIOD | 24x Single Ended, 12x Differential Pairs | CRUVI B2B, J5 | A0...5, B0...5 (N/P) | | MSIO/GPIO | 8x Single Ended | CRUVI B2B, J6 | A_X0...7 | | MSIO | 8x Single Ended | CRUVI B2B, J7 | B_X0...7 | | MSIO/GPIO | 8x Single Ended | CRUVI B2B, J8 | C_X0...7 | | LEDs (2x MSIO, 2x MSIO/GPIO) | 4x Single Ended | D1...4 | LED1...4 | | MSIO | 8x Single Ended | Pmod Header, J9 |
| | Push Button | 1x Single Ended | Push Button, S1 | M_RESET | | Push Button | 1x Single Ended | Push Button, S2 | pull-up, User Button | | MSIO/GPIO/I2C | 2x Single Ended | CRUVI B2B J6 | I2C | | ETH | 2x Differential Pairs 2x Single Ended | RJ45 Socket, J1 RJ45 LEDs, J1 |
Yellow and Green LEDs | | UART | 2x Single Ended | FTDI, U1 | UART RX/TX | | FTDI I/O | 2x Single Ended | FTDI, U1 | BDBUS2-BDBUS3 | | CLK | 1x Single Ended | Oscillator, U8 | 30 MHz | | MSIOD | 4x Single Ended | CRUVI B2B, J5 | RESET, HSIO, HSO, HSI | | IO (3x MSIO, 4x MSIO/GPIO, 2x MSIO GPIO/I2C) | 9x Single Ended | CRUVI B2B, J5 |
| | Power Signal | 1x Single Ended | RED LED, D8
| PG_DCDC | | SC_SPI | 4x Single Ended | pin header, J3 | SC_CLK, SC_SDO, SC_SDI, SC_SS | | GOLDEN | 1x Single Ended | Testpoint, TP1 | GOLDEN | | JTAGSEL | 1x Single Ended | Testpoint, TP2 | JTAGSEL |
|
CRUVI B2B Connectors
The TEMB0005 is equipped with three Low Speed Connectors J6...8 and a High Speed Connector J5. These connectors are provided for CRUVI extension cards. More information is provided in the B2B Connectors section.
| Scroll Title |
|---|
| anchor | Table_SIP_CRUVIB2B |
|---|
| title | CRUVI B2B connectors information |
|---|
|
...
RJ45 LAN Socket
...
| anchor | Table_SIP_ETH |
|---|
| title | General PL I/O to B2B connectors information |
|---|
...
Dual Sockets
...
| anchor | Table_SIP_DualSocket |
|---|
| title | General PL I/O to B2B connectors information |
|---|
...
| Scroll Title |
|---|
| anchor | Table_SIP_PMod |
|---|
| title | General PL I/O to B2B connectors information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Pin | Schematic | Connected to | Notes |
|---|
|
...
| anchor | Table_SIP_PinHeader |
|---|
| title | General PL I/O to B2B connectors information |
|---|
...
UART
...
| anchor | Table_SPI_UART |
|---|
| title | CAN Tranciever interface MIOs |
|---|
...
| Low | J6 | A_X0...1 | B2B, J11 | alternative GPIO |
| A_X2...5 | B2B, J11 | alternative SPI |
| A_X6...7 | B2B, J11 | alternative I2C0 SDA/SCL | | J7 | B_X0...7| | B2B, J11 |
| | J8 | C_X0...7 | B2B, J11 | alternative GPIO | | High | J5 | A0...A5 (N/P) | B2B, J11 | HS I/O | | B0...B5 (N/P) | B2B, J11 | HS I/O | | HSIO, HI, HO, RESET | B2B, J11 | HS I/O single ended | SMB_ALERT, SMB_SDA, SMB_SCL, MODE, REFCLK | B2B, J11 |
| | DI,DO,SCK,SEL | B2B, J11 | alternative GPIO |
|
USB2.0 Socket
There is a USB2.0 Socket, J2 provided in order to use JTAG/UART via FTDI, U1.
| Scroll Title |
|---|
| anchor | Table_SIP_USB2 |
|---|
| title | USB2.0 Socket information |
|---|
|
...
JTAG access is provided through B2B connector J11 connected to the FTDI. For more information please refer to the FTDI section.
| Scroll Title |
|---|
| anchor | Table_SIP_JTG |
|---|
| title | JTAG pins connection |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
JTAG SignalB2B Connector| TMS | J11-14 | | TDI | J11-8 | | TDO | J11-10 | | TCK | J11-12 | | JTAGSEL | J11-9 | |
Test Points
| Connected to | Notes |
|---|
| ID | N.C | N.C |
| | D+ | DL_P | FTDI, U1 | Through Line Filter, L1 | | D- | DL_N | FTDI, U1 | Through Line Filter, L1 | | Vbus | VBUS | Diode, U2 |
|
|
RJ45 LAN Socket
There is a RJ45 Ethernet LAN Socket, J1 connected to B2B, J11 via 2x channels data receive and transmit.
| Page properties |
|---|
|
you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section.
Example:
| Test Point | Signal | B2B | Notes |
|---|
10 | PWR_PL_OK | J2-120 | | Scroll Title |
|---|
| anchor | Table_SIP_TPsETH |
|---|
| title | Test Points InformationRJ45 LAN Socket information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Test PointSignal| Schematic | Connected to | Notes |
|---|
TP1 | GOLDENTP2 | JTAGSELTP3 | PG_DCDCRed LED, D8 | TP4 | VADJ | Regulator, U6 | TP5 | PROBE_B
| | RD- | ETH1_RX_N | B2B, J11 |
| | Green LED | ETH1_LED0 | B2B, J11 |
TP6 | PROBE_A | Link/Activity indicator | | Yellow LED | ETH1_LED1 | B2B, J11 |
|
On-board Peripherals
| Page properties |
|---|
|
Notes : - add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
| Page properties |
|---|
|
Notes : In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection |
There is a PMod Header, J9 connected to the B2B, J11 and all signals are protected from invers polarity by two diodes D6, D7.
| Scroll Title |
|---|
| anchor | Table_SIP_PMod |
|---|
| title | PMod Header information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Schematic | Connected to | Notes |
|---|
| PM0...3 (N/P) | B2B, J11 |
|
|
There is a Pin Header 6x1, J3 provided for SPI signals.
| Scroll Title |
|---|
| anchor | Table_SIP_PinHeader |
|---|
| title | Pin Header connections |
|---|
|
| Scroll Title |
|---|
| anchor | Table_OBP |
|---|
| title | On board peripherals |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
EEPROM
| 3.3V | B2B, J11 |
| | 2 | GND | B2B, J11 |
| | 3 | SC_SDO | B2B, J11 |
| | 4 | SC_SDI | B2B, J11 |
| | 5 | SC_SS | B2B, J11 |
| | 6 | SC_CLK | B2B, J11 |
|
|
UART
There is an UART channel provided in order to communicate with the module and signals are accessible via B2B, J11 through the FTDI, U1There is an EEPROM IC, U3 provided for storing the FTDI (U1) configuration.
| Scroll Title |
|---|
| anchor | Table_OBPSPI_EEPUART |
|---|
| title | I2C EEPROM interface MIOs and pinsUART connection |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Notes | DI/DO | EEDATA | CLK | EECLK | CS | EECS| Connected to | Notes |
|---|
| BDBUS1 | UART1_TXD | B2B, J11 | FTDI receiver input | | BDBUS0 | UART1_RXD | B2B, J11 | FTDI transmitter output |
|
JTAG Interface
JTAG access is provided through B2B connector J11 connected to the FTDI. For more information please refer to the FTDI section.
| Scroll Title |
|---|
| anchor | Table_OBPSIP_I2C_EEPROMJTG |
|---|
| title | I2C address for EEPROMJTAG pins connection |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
| MIO Pin | I2C Address | Designator | Notes |
|---|
Push Buttons
...
| anchor | Table_OBP_BTN |
|---|
| title | On-board Push Buttons |
|---|
...
JTAG Signal | B2B Connector |
|---|
| TMS | J11-14 | | TDI | J11-8 | | TDO | J11-10 | | TCK | J11-12 | | JTAGSEL | J11-9 |
|
Test Points
| Page properties |
|---|
|
you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delet the Test Point section. Example: | Test Point | Signal | B2B | Notes |
|---|
| 10 | PWR_PL_OK | J2-120 |
|
...
| Scroll Title |
|---|
| anchor | Table_OBPSIP_LEDTPs |
|---|
| title | On-board LEDsTest Points Information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
DesignatorColorActive Level| Note | D1...D4 | GreenActive HighUser LEDS | | D5 | Green | 5VIN | Active High | Power Status LED | D6 | Red | PG_DCDC | Active Low | |
...
| anchor | Table_OBP_CLK |
|---|
| title | Osillators |
|---|
...
Power and Power-On Sequence
...
In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:
- Power on-sequence
- Power distribution
- Voltage monitoring circuit
| Note |
|---|
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" . |
| JTAGSEL | B2B, J11 |
| | TP3 | PG_DCDC | B2B, J11 | Red LED, D8 | | TP4 | VADJ | Regulator, U6 |
| | TP5 | PROBE_B | B2B, J11 |
| | TP6 | PROBE_A | B2B, J11 |
|
|
On-board Peripherals
| Page properties |
|---|
|
Notes : - add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
| Page properties |
|---|
|
Notes : In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection |
| Scroll Title |
|---|
| anchor | Table_OBP |
|---|
| title | On board peripherals |
|---|
|
Power Supply
Power supply with minimum current capability of 2 A for system startup is recommended.
Power Consumption
| Scroll Title |
|---|
| anchor | Table_PWR_PC |
|---|
| title | Power Consumption |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
| Power Input Pin | Typical Current |
|---|
| 5VIN | TBD* |
* TBD - To Be Determined
Power Distribution Dependencies
...
| anchor | Figure_PWR_PD |
|---|
| title | Power Distribution |
|---|
FTDI FT2232H
The FTDI chip (U8) converts signals from USB2 to variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the capacity of the FT2232H chip which is used in Multi-Protocol Synchronous Serial Engine (MPPSE) mode for JTAG.
The configuration of FTDI FT2232H chip is pre-programmed on the EEPROM U10.
...
| Scroll Only |
|---|
 Image Removed
|
...
| Scroll Title |
|---|
| anchor | FigureTable_PWROBP_PSFT2232H |
|---|
| title | Power SequencyFTDI chip interfaces and pins |
|---|
|
| ignoredrawioborderfalse |
| diagramName | TEMB0005_PWR_PS |
|---|
| simpleViewer | false |
|---|
width | | links | auto |
|---|
| tbstyle | hidden |
|---|
diagramDisplayName | | lbox | true |
|---|
| diagramWidth | 641 |
|---|
| revision | 2 |
|---|
| Scroll Only |
|---|
 Image Removed
|
Power Rails
...
| anchor | Table_PWR_PR |
|---|
| title | Module power rails. |
|---|
...
B2B Connector
JM1 Pin
...
B2B Connector
JM2 Pin
...
B2B Connector
JM3 Pin
...
Board to Board Connectors
...
...
use "include page" macro and link to the general B2B connector page of the module series,
...
? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.
3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)
| repeatTableHeaders | default |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Pin | Schematic | Connected to | Notes |
|---|
| ADBUS0 | TCK | FPGA Bank 1B, U6 | JTAG interface | | ADBUS1 | TDI | FPGA Bank 1B, U6 | | ADBUS2 | TDO | FPGA Bank 1B, U6 | | ADBUS3 | TMS | FPGA Bank 1B, U6 | | BDBUS0 | F_UART_TX | FPGA Bank 1B, U6 | UART transmitter output | | BDBUS1 | F_UART_RX | FPGA Bank 1B, U6 | UART receiver input | | BDBUS2 | BDBUS2 | B2B,J11 | I/O | | BDBUS3 | BDBUS3 | B2B,J11 | I/O | | OSCI | OSCI | Oscillator, U4 | Clock 12 MHz | | EECS | EECS | EEPROM, U3 | EEPROM Contains FTDI configuration | | EECLK | EECLK | EEPROM, U3 | | EEDATA | EEDATA | EEPROM, U3 | | DM/DP | D_N/ D_P | Micro USB, J2 | USB to UART | | nRESET | 3.3V | 3.3V |
|
|
EEPROM
There is an EEPROM IC, U3 provided for storing the FTDI (U1) configuration.
| Scroll Title |
|---|
| anchor | Table_OBP_EEP |
|---|
| title | I2C EEPROM interface MIOs and pins |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Pin | Schematic | Notes |
|---|
| DI/DO | EEDATA | Data | | CLK | EECLK | Clock | | CS | EECS | Select |
|
The I2C address is as the following.
| Scroll Title |
|---|
| anchor | Table_OBP_I2C_EEPROM |
|---|
| title | I2C address for EEPROM |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| I2C Address | Designator | Notes |
|---|
| 0x70 | U3 |
|
|
Push Buttons
There are two Push Buttons provided on the TEMB0005 designated as S1, S2. The Push Button S2 is considered to be as user buttons and S1 is provided to reset the module on the carrier.
| Scroll Title |
|---|
| anchor | Table_OBP_BTN |
|---|
| title | On-board Push Buttons |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Designator | Schematic | Connected to | Functionality | Note |
|---|
| S1 | M_RESET | B2B, J11 | Reset |
| | S2 | Button | BUTTON | User Button |
|
|
LEDs
There are 4 green LEDs provided as user LEDs.
| Scroll Title |
|---|
| anchor | Table_OBP_LED |
|---|
| title | On-board LEDs |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Designator | Color | Connected to | Active Level | Note |
|---|
| D1...D4 | Green | B2B, J11 | Active High | User LEDS | | D5 | Green | 5VIN | Active High | Power Status LED | | D6 | Red | PG_DCDC | Active Low | from module |
|
Clock Sources
| Scroll Title |
|---|
| anchor | Table_OBP_CLK |
|---|
| title | Osillators |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Designator | Description | Frequency | Note |
|---|
| U4 | MEMS Oscillator | 12 MHz |
| | U8 | MEMS Oscillator | 30 MHz |
|
|
Power and Power-On Sequence
| Page properties |
|---|
|
In 'Power and Power-on Sequence' section there are three important digrams which must be drawn: - Power on-sequence
- Power distribution
- Voltage monitoring circuit
|
Power Supply
Power supply with minimum current capability of 2 A for system startup is recommended.
Power Consumption
| Scroll Title |
|---|
| anchor | Table_PWR_PC |
|---|
| title | Power Consumption |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Power Input Pin | Typical Current |
|---|
| 5VIN | TBD* |
|
* TBD - To Be Determined
Power Distribution Dependencies
| Scroll Title |
|---|
| anchor | Figure_PWR_PD |
|---|
| title | Power Distribution |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| |
|---|
| diagramName | TEMB0005_PWR_PD |
|---|
| simpleViewer | false |
|---|
| width | 639 |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| diagramWidth | 641 |
|---|
| revision | 2 |
|---|
|
|
| Scroll Only |
|---|
Image Added |
|
Power-On Sequence
| Scroll Title |
|---|
| anchor | Figure_PWR_PS |
|---|
| title | Power Sequency |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| |
|---|
| diagramName | TEMB0005_PWR_PS |
|---|
| simpleViewer | false |
|---|
| width | 639 |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| diagramWidth | 641 |
|---|
| revision | 7 |
|---|
|
|
| Scroll Only |
|---|
Image Added |
|
Power Rails
| Scroll Title |
|---|
| anchor | Table_PWR_PR |
|---|
| title | Module power rails. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Power Rail Name | B2B Connector J11 Pin | CRUVI Connector J5 Pin | B2B Connector J6 Pin | B2B Connector J7 Pin | B2B Connector J8 Pin | Direction | Notes |
|---|
| 3.3V | 1, 2, 3, 4 | - | 10 | 10 | 10 | Output |
| | VDAJ | 22 | 36 | - | - | - | Output |
| | 5VIN | - | - | 12 | 12 | 12 | Output |
|
|
Board to Board Connectors
| Page properties |
|---|
|
- This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series, For example: 6 x 6 SoM LSHM B2B Connectors
| Include Page |
|---|
| 6 x 6 SoM LSHM B2B Connectors |
|---|
| 6 x 6 SoM LSHM B2B Connectors |
|---|
|
|
| Include Page |
|---|
| DRAFT:3.1 x 5.6 SoM ST5/SS5 B2B Connectors |
|---|
| DRAFT:3.1 x 5.6 SoM ST5/SS5 B2B Connectors |
|---|
|
CRUVI B2B Connectors
| Include Page |
|---|
| CRUVI B2B Connectors |
|---|
| CRUVI B2B Connectors |
|---|
|
...
Technical Specifications
Absolute Maximum Ratings
| Scroll Title |
|---|
| anchor | Table_TS_AMR |
|---|
| title | PS absolute maximum ratings |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Symbols | Description | Min | Max | Unit |
|---|
| VIN | Input Supply Voltage | -2.5+5 | 34 | V | | T_STG | Storage Temperature | -55 | 160125 | °C |
|
Recommended Operating Conditions
...
| Scroll Title |
|---|
| anchor | Table_TS_ROC |
|---|
| title | Recommended operating conditions. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Parameter | Min | Max | Units | Reference Document |
|---|
| VIN | 4.06 | 5.58 | V | See the carrier datasheets. | | T_OPT | -450 | 8570 | °C | Push button datasheet. |
|
Physical Dimensions
Module size: 115 mm × 70 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 5 4 mm.
PCB thickness: 1.7 6 mm.
| Page properties |
|---|
|
In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM. For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below: https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF
|
...
| Scroll Title |
|---|
| anchor | Figure_TS_PD |
|---|
| title | Physical Dimension |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| |
|---|
| diagramName | TEMB0005_TS_PD |
|---|
| simpleViewer | false |
|---|
| width | 639 |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| diagramWidth | 641 |
|---|
| revision | 2 |
|---|
|
|
| Scroll Only |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
| 
|
|
...
| Scroll Title |
|---|
| anchor | Table_RH_HRH |
|---|
| title | Hardware Revision History |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Date | Revision | Changes | Documentation Link |
|---|
| 2020-05-20 | REV01 | Initial Release | --- |
|
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
| Scroll Title |
|---|
| anchor | Figure_RV_HRN |
|---|
| title | Board hardware revision number. |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| |
|---|
| diagramName | TEMB0005_RV_HRN |
|---|
| simpleViewer | false |
|---|
| width | 200 |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| diagramWidth | 167 |
|---|
| revision | 4 |
|---|
|
|
| Scroll Only |
|---|
|
|
...
| Include Page |
|---|
| IN:Legal Notices |
|---|
| IN:Legal Notices |
|---|
|
| draw.io Diagram |
|---|
| border | false |
|---|
| diagramName | TEMB0005_PWR_PS |
|---|
| simpleViewer | false |
|---|
width | | links | auto |
|---|
| tbstyle | hidden |
|---|
diagramDisplayName | | lbox | true |
|---|
| diagramWidth | 641 |
|---|
| revision | 1 |
|---|
|