| 8Gbit - K4F8E304HB-MGCJ (LPDDR4) | #28217 |
X | DDR SODIMM Socket |
|
Y | IC Socket (IC Debug Holder) |
|
Flash memory (2x for all modules except TE0802) |
0 | Not populated | - | - | - |
1 | TE0803/0807/0808/0813/0817/0818/0820/0821/0823/0865: 128MByte | Industrial | 512Mbit - MT25QU512ABB8E12-0SIT | #29292 |
AM0010: 128MByte |
2 | TE0802/TE0803/0807/0808/0820/0821/0823: 64MByte | Industrial | 256Mbit - MT25QL256ABA8E12-1SIT | #28856 |
3 | TE0803/0807/0808/0820/0821/0823: 256MByte | Industrial | 1Gbit - MT25QU01GBBB8E12-0SIT | #28264 |
4 | TE0803/0807/0808/0820/0821/0823: 512MByte. | Industrial | 2Gbit - MT25QU02GCBB8E12-0SIT | #28286 |
5 | TE0803/0807/0808/0820/0821/0823: 64MByte | Automotive | 256Mbit - MT25QU256ABA8E12-0AAT | #30245 |
6 | TE0818/TE0830: 128MByte | Extended | 512MBit - IS25WP512M-RHLE (not supported) | #29423 |
7 | TE0812: 256MByte
| Industrial | 1Gbit - MT25QL01GBBB8E12-0SIT
| #29992 |
8 | TE0812: 256MByte | Automotive | 1Gbit - MT25QL01GBBB8E12-0AUT | #32363 |
9 | TE0812: 128MByte | Industrial | 512Mbit - MT25QL512ABB8E12-0SIT | #28934 |
eMMC (for TE0820/0821/0823) |
|
- | Not present (for TE0803/07/08/13/17/18) | - | - | - |
0 | Not populated (for TE0820/0821/0823) | - | - | - |
F | TE0820/0821/0823: 8 GByte | Industrial | 8GByte - IS21ES08G-JCLI | #29169 (EOL)
|
G | TE0820/0821/0823: 8 GByte | Commercial | 8GByte - KLM8G1GETF-B041 | #28669 (NRND) |
K | TE0820/0821/0823: 64 GByte | Industrial | 64GByte - IS21ES64G-JCLI | #29799 |
M | TE0820/0821/0823/0865/AM0010: 8 GByte | Industrial | 8GByte - SDINBDG4-8G-XI2 | #31133 |
N | TE0821: 32GByte; TE0812: 2x 32 GByte | Industrial | 32GByte - SDINBDG4-32G-XI2 | #31139 |
P | TE0820/0821/0823/AM0010: 64 GByte | Industrial | 64GByte - SDINBDG4-64G-XI2 | #31140 |
R | TE0806: 8 GByte | Industrial | 8GByte - IS21ES08GA-JCLI | #33145 |
S
| TE0821: 16 GByte | Industrial | 16GByte - SDINBDG4-16G-XI2
| #31138 |
Other options (Connectors, custom options) |
Module | Variation | Description |
All | A | Standard assembly variant |
L | Low profile connector height |
C | Standard connector height, FPGA: XCZUxxx-xxxxxxxxx4524 (without encryption) |
D | Low profile connector height, FPGA: XCZUxxx-xxxxxxxxx4524 (without encryption) |
... | Custom assembly variant, look additional table below |
Additional options |
Blank | No extra options |
A
| With mounted heat sink |
K | With mounted specific heat spreader for module |
P
| Prototype |
S | Starter Kit |
Z | DCDC converter MUN3CAD03-SE instead of TPS82085SIL or MUN12AD03-SE instead of TPS82130SILR (depending on which regulator is used in the original design) |
... | Custom assembly variant, look additional table below |