When Xilinx SDK openopens, you should:
1) Set the repositories for device driver of custom block used in SDK Microblaze project
...
- click Xilinx "Xilinx Tools" and then "Repositories"
Scroll pdf title |
---|
title | XilinxSDKProjectRepositories |
---|
|
Image Removed |
- after this a pop-up "Preferences" will appears
Scroll pdf title |
---|
title | Add Reference Repositories for custom driver of custom block/device |
---|
|
Image Removed |
...
...
- click "Apply"
- you should click "OK"
- after this you must wait until the building procedure ended.
2) Create an
...
"
...
Scroll pdf title |
---|
title | Xilinx SDK New Project |
---|
|
Image Removed |
...
Hardware
...
Platform Specification
...
Project"
...
Scroll pdf title |
---|
title | Xilinx SDK HW Project New Wizard 1 |
---|
|
Image Removed |
...
"
...
Image Removed
...
reference-TE0300_hw_platform"
...
...
3) Create
...
a
...
"Board
...
Support Package Project
...
Scroll pdf title |
---|
title | New Xilinx Board Support Packages |
---|
|
Image Removed |
...
"
...
"standalone_bsp_0
...
"
4) Recreate the "Application Project" "demo"
Scroll pdf title |
---|
|
Image Removed |
- after this you should click "standalone" and set "stdin" and "stdout" to "rs232" or "debug_module"
- you should select "rs232" if you desire to use an external UART
- you should select "debug_module" if you desire that the XMD_UART works as local UART through the JTAG connection
Tip |
---|
Demo program (running on MicroBlaze) will work even in case the UART port is left unconnected: it is not necessary to use a USB/Uart converter or Uart port on a PC, if you are using XMD UART HDL block. |
Scroll pdf title |
---|
title | BSP rs232 or debug_module |
---|
|
Image Removed |
- after this you should click drivers to verify that all Microblaze components are supported by the driver in the repository C:\XilinxProject\TE-EDK-IP; click "OK" and the pop-up should dissapears;
Scroll pdf title |
---|
title | BSP drivers for Microblaze components |
---|
|
Image Removed |
- after you have verified that all Microblaze components are supported by a driver, right click the "standalone_bsp_0" folder in "Project Explorer" and
- the pop-up "Properties for standalone_bsp_0" should appears
- click "Project References"
- you must verify that "standalone_bsp_0" references to "reference-TE0300_hw_platform":if is not checked you must check the box.
Scroll pdf title |
---|
title | "standalone_bsp_0" Project References |
---|
|
Image Removed |
- the FX2 microcontroller on the TE0300, TE0320 or TE0630 family should contain valid firmware before proceeding. If the FX2 microcontroller has not been programmed before, please follow the instructions in the ????? family User Manuals. You can use Cypress, Python OpenFut or C# OpenFutNet programs.
- If you are sure that the FX2 microcontroller is properly connected, you can connect to the TE0300/TE0320/TE0630 module with a JTAG adapter cable. We recommend using the Xilinx Platform Cable USB. Then connect the TE0300/TE0320/TE0630 module to a USB cable.
If the HDL design was successfully implemented and downloaded to the TE0300/TE0320/TE0630 family module, you can proceed to compile the MB software. Press the "build all user applications" button.