Page History

Note

The mounting of the heatspreader must be done with care. We do not take over guarantee for self assembly.

Compatibility

This heatspreader can be mounted on all TE0745 Revision 2 (TE0745-02-...).

Accessories

Gap Filler: Berquist GF3500S35-00-60-50CC

Gun: 50CC MANUAL GUN 1:1 RATIO SS95407

Tool: PH1 Philips crosshead torque screwdriver

Assembly

1. Apply Gap Filler in at least EN: Apply an approx. 2 mm thick GapFiller layer thickness to the following components:
   DE: Auf folgende Bauteile eine ca. 2mm dicke GapFiller-Schicht auftragen:
   Image Removed
   EN: Place KK0745-02 on module:
   DE: KK0745-02 auf Modul platzieren:
   Image Removed
   EN: Fix the KK0745-02 from below with the included M3x6mm screws with 0.5Nm:
   DE: KK0745-02 von unten mit den beigelegten M3x6mm Schrauben mit 0,5Nm fixieren:
   Image Removed
   Image Added
   

   Scroll Pagebreak

   
   
   
2. Align KK0745-02 carefully and press on lightly:
   
   Image Added
   
   

3. Set the torque screwdriver to 0.5Nm.
   Insert the PH1 Philips crosshead bit and fix it crosswise from below with the four M3x6mm pan-head screws.

   
   
   Image Added