Page History
...
The mounting of the heatspreader must be done with care. We do not take over guarantee for self-assembly.
Compatibility
This heatspreader can be mounted on TE0808 Revision 5 (TE0808-05-... …).
Info |
---|
This heatspreader can't be mounted on TE0808 Revision 3 & 4 (TE0808-03-... … , TE0808TE0808-04-... … ). |
Accessories
Gap Filler: Berquist GF3500S35-00-60-50CC
Gun: 50CC MANUAL GUN 1:1 RATIO SS95407
Nozzle: Nozzle 1-1 5cc 6.3-21 1/4D SS95437
Tool: PH1 Philips crosshead torque screwdriver
...
- Apply Gap Filler in at least approx. 2 mm thickness to the following components:
draw.io Diagram border true diagramName TE0808-05-Gap-Filler simpleViewer true width 400 links auto tbstyle top diagramDisplayName lbox true diagramWidth 1501 revision 3 Scroll Pagebreak - Align KK0808-05 carefully and press on lightly:
Set the torque screwdriver to 0.5Nm / 4,5 inlb.
Insert the PH1 Philips crosshead bit and fix it .
Fix the heatspreader crosswise from below with the four M3x6mm M3 × 6 mm pan-head screws.
draw.io Diagram border true diagramName TE0808-05-KK-Schrrauben simpleViewer true width 400 links auto tbstyle top diagramDisplayName lbox true diagramWidth 916 revision 2 - Remove any gap filler squeezed out over the edge of the heat sink with an ESD antistatic cloth.
Note Make sure that no gap filler gets on the contacts of the connectors.
Include Page | ||||
---|---|---|---|---|
|
...
Overview
Content Tools