Page History

...

Products Affected

This change affects all Trenz Electronic TE0600 SoMs: TE0600-03*.

Changes

1) Leds D1 , D5 were changed from 150060VS75000 to SML-P11MTT86

2) R83 was added. R29 was changed from 2.2k to 100

3) U9 was changed from SiT8008AI to SiT8008BI

4) D3 was changed from single BAT54VV,115 to pair BAT54A,215

5) U2 was changed from EN6347QI to MPM3860GQW-Z

6) U3 was changed from EP53F8QI to MPM3834CGPA

7) Stacked vias were removed

8) Net BR0 was connected to GND

9) B2B signal groups information was added

10) Field filename was renamed for all schematic pages

11) Legal Notices page was added

12) System overview and power-on sequencing were added for TE0600.SchDoc page

13) Testpoints TP11 - TP14 , TP23 - TP28 were added

14) R56, R57, R58 were changed from 2k2 to 2k4

15) U12 was fitted for all module assembly variants

16) R36 was changed from 120R to 240R, R84 and T1 were added

17) U4 and U14 were changed from LP3878SD-ADJ to TPS74601PBDRVT

#1 Changed leds (D1, D5) from 150060VS75000 to SML-P11MTT86.

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Impact:

#1

Type:

Reason: 

Changes

#1 Changed DCDC EN6347QI (U2) to MPM3860GQW-Z and adapted power circuit.

Type: Schematic Change

Reason: EOL of Component.

Impact: None. Increased current output capability. Minor changes in electrical characteristics.

#2 Changed DCDC EP53F8QI (U3) to MPM3834CGPA and adapted power circuit.

Type: Schematic Change

Reason: EOL of Component.

Impact: None. Minor changes in electrical characteristics.

#3 Changed LDO LP3878SD-ADJ (U4, U14) to TPS74601PBDRVT and adapted power circuit.

Type: Schematic Change

Reason: EOL of Component.

Impact: None. Increased current output capability. Minor changes in electrical characteristics.

#4 Assembled clock SiT8008BI-73-XXS-100.000000E (U12).

Type: BOM Change

Reason: System clock improvement.

Impact: Add additional system clock.

#5 Inserted internal pull-up IO resistor option for FPGA via external resistor (R83).

Type: Schematic Change

Reason: Increase flexibility.

Impact: None.

#6 Improved led (D1) driving circuit via adding MOSFET (T1) and resistor (R84) and changed 120 Ohm resistor (R36) to 240 Ohm.

Type: Schematic Change

Reason: Improve led circuit.

Impact: None.

#7 Changed 2.2 kOhm resistor (R29) to 100 Ohm.

Type: BOM Change

Reason: Follow AMD recommendation.

Impact: None.

#8 Changed diode (D3) from BAT54VV,115 to two separated diodes (D2, D3) BAT54A,215.

Type: Schematic Change

Reason: BOM optimization.

Impact: None.

#9 Changed 2.2 kOhm resistors (R56, R57, R58) to 2.4 kOhm.

Type: BOM Change

Reason: Follow AMD recommendation.

Impact: None.

#10 Pulled-down board revision signal "BR0" (FPGA U5, pin P17) and updated board revision documentation.

Type: Schematic Change

Reason: Update revision information.

Impact: None. Custom design needs to be updated by customer in cases where board revision signals are used.

#11 Added testpoints (TP11...TP14, TP23...TP28).

Type: PCB Change

Reason: Improve voltage and system monitoring.

Impact: None.

#12 Changed fiducials to standard fiducial type.

Type: Schematic Change

Reason: Use standard fiducials.

Impact: None.

#13 Changed stacked vias to staggered vias.

Type: PCB Change

Reason: Reliability improvement.

Impact: Reliablity improvement.

#14 Signal trace lengths changed.

Type: PCB change

Reason: Result of changes above.

Impact: Changed trace length have to be taken into account in existing designs.

#15 Updated B2B documentation.

Type: Documentation Update

Reason: Documentation Improvement.

Impact: None.

#16 Renamed document sheets.

Type: Documentation Update

Reason: Documentation Improvement.

Impact: None.

#17 Updated legal notices, revision history, block and power diagram. Updated page count and order. 

Type: Documentation Update

Reason: Documentation Improvement.

Impact: None.Impact:

Method of Identification

The revision number is visible on the top side of the PCB.

Image Added

Production Shipment Schedule

From XXXXXSeptember 2024, after old stock is gone. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.

...

...