Page History

Custom_table_size_100

Page properties

hidden	true
id	Comments

Module: TRM Name always "TE Series Name" +TRM
Example: "TE0728 TRM"

Template Change history:

Version	Changes	Author
4.2	Changes Xilinx to AMD	ED
4.1	Minor changes Notes Tables	ED
4.0	Rework for smaller TRM which can be generated faster Reduce Signal Interfaces Pin Reduce On Board Periphery Reduce Power Move Configuration Signals from Overview to own section	JH
3.12	Version History changed from list to table all changed title-alignment for tables from left to center	ma
3.11	update "Recommended Operating Conditions" section
3.1	New general notes for temperature range to "Recommended Operating Conditions"
3.02	add again fix table of content with workaround to use it for pdf and wiki Export Link for key features examples Notes for different Types (with and without Main FPGA) Export Link for Signals, Interfaces and Pins examples Notes for different Types (Modul, Modul Hybrid, Evalboard, Carrier)
3.01	remove fix table of content and page layout ( split page layout make trouble with pdf export) changed and add note to signal and interfaces, to on board periphery section ...(not finished)
3.00	→ separation of Carrier/Module and evaluation kit TRM
2.15	add excerpt macro to key features
2.14	add fix table of content add table size as macro

Page properties

hidden	true
id	Comments

Important General Note:

If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

Figure template:

Scroll Title

anchor	Figure_anchorname
title-alignment	center
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Table template:
- Layout macro can be use for landscape of large tables

Scroll Title

anchor	Table_tablename
title-alignment	center
title	Text

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Example	Comment
1	2

The anchors of the Scroll Title should be named consistent across TRMs. A incomplete list of examples is given below
- <type>_<main section>_<name>
  - type: Figure, Table
  - main section:
    - "OV" for Overview
    - "SIP" for Signal Interfaces and Pins,
    - "OBP" for On board Peripherals,
    - "PWR" for Power and Power-On Sequence,
    - "B2B" for Board to Board Connector,
    - "TS" for Technical Specification
    - "VCP" for Variants Currently in Production
    - "RH" for Revision History
  - name: custom, some fix names, see below
- Fix names:
  - "Figure_OV_BD" for Block Diagram
  - "Figure_OV_MC" for Main Components
  - "Table_OV_IDS" for Initial Delivery State
  - "Table_PWR_PC" for Power Consumption
  - "Figure_PWR_PD" for Power Distribution
  - "Figure_PWR_PS" for Power Sequence
  - "Figure_PWR_PM" for Power Monitoring
  - "Table_PWR_PR" for Power Rails
  - "Table_PWR_BV" for Bank Voltages
  - "Table_TS_AMR" for Absolute_Maximum_Ratings
  - "Table_TS_ROC" for Recommended_Operating_Conditions
  - "Figure_TS_PD" for Physical_Dimensions
  - "Table_VCP_SO" for TE_Shop_Overview
  - "Table_RH_HRH" for Hardware_Revision_History
  - "Figure_RH_HRN" for Hardware_Revision_Number
  - "Table_RH_DCH" for Document_Change_History
Use Anchor in the document: add link macro and add "#<anchorname>
Refer to Anchor from external : <page url>#<pagename without space characters>-<anchorname>

Page properties

hidden	true
id	Comments

-----------------------------------------------------------------------

Page properties

hidden	true
id	Comments

Note for Download Link of the Scroll ignore macro:

Link to the base folder of the module (remove de/ or en/ from the URL):
Example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5_Carriers/TE0728/

Scroll Ignore
Download PDF version of this document.

Overview

Page properties

hidden	true
id	Comments

Notes :

short description of the PCB
Short Link of the wiki resources reference:
- Use short link the Wiki Resource page, for example: http://trenz.org/te0728-info
- List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

The Trenz Electronic TEB2000 carrier board provides functionality for development, evaluation and testing purposes of Trenz 4 x 5 cm SoMs (System on Module).

The carrier board is equipped with a broad range of various components and connectors for different configuration setups and needs. On-module functional components and multipurpose I/Os of the SoM's PL and PS logic are connected via board-to-board connectors to the carrier board components and connectors for easy user access.

See page "4 x 5 SoM Carriers" for more information about the SoM's supported by the TEB2000 Carrier Board.

Refer to http://trenz.org/teb2000-info for the latest online version of this manual and other available documentation.

Key Features

Page properties

hidden	true
id	Comments

Note:
'description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

→ See examples for different types <Series Name> TRM Template section examplesexamples#%3CSeriesName%3ETRMTemplatesectionexamples-KeyFeatures

Excerpt

On Board:
- System Controller (SC) (LCMXO2-1200HC-4TG144I¹⁾)
- Mini USB for JTAG and UART connection (FTDI FT2232H)
- Mini USB second UART connection (FTDI FT230XQ)
- SDIO port expander
- 4 x User LEDs
  - D1, D2 connected to SC (firmware-dependent functionality)
  - D3, D4 connected to SC and 4 x 5 SoM
- 2 x User push button
  - Connected to SC (firmware-dependent functionality)
  - Currently used for Hard- and Soft-Reset
- 4 User DIP switches
  - Enable/disable update of the SC
  - MIO0 (accessible signal by SC and SoM)
  - 2 "mode" bits
Interface:
- Trenz 4 x 5 SoM socket
  - 3 x Samtec LSHM series high-speed connectors
- Micro SD card connector
- 2 x VG96 backplane connectors assembly option (mounting holes and solder pads)
- Mini or Normal USB for SoM USB-OTG connection ¹⁾
- RJ45 GbE connector
Power:
- Overvoltage-, undervoltage- and reversed- supply-voltage-protection
- Barrel jack (2.1 mm) for 5V power supply input
Dimension:
- 100 mm x 64.5 mm
Notes

¹⁾Depends on assembly variant

Block Diagram

Page properties

hidden	true
id	Comments

add drawIO object in Scroll Ignore section and add reference image in Scroll Only.

Note
For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .

Note

Title (not anchor) of all Scroll Title such as DrawIOs and Tables should be changed according to the Module name.

Example: TE0812 Block Diagram

Note

All created DrawIOs should be named according to the Module name:

Example: DrawIO of TE0812 Block Diagram should be named TE0812_OV_BD

Scroll Title

anchor	Figure_OV_BD
title-alignment	center
title	TEB2000 block diagram

Scroll Ignore

draw.io Diagram

border	true

diagramName	TEB2000_OV_BD
simpleViewer	false
width
links	auto
tbstyle	hidden
diagramDisplayName
lbox	true
diagramWidth	630
revision	13

Scroll Only

Main Components

Page properties

hidden	true
id	Comments

Notes :

Picture of the PCB (top and bottom side) with labels of important components
Add List below

Note
For more information regarding how to add board photos, Please refer to "Diagram Drawing Guidline" .

Scroll Title

anchor	Figure_OV_MC
title-alignment	center
title	TEB2000 main components

Scroll Ignore

draw.io Diagram

diagramWidth
border	true

diagramName	TEB2000-01_Figure_OV_MC
simpleViewer	false
width
links	auto
tbstyle	hidden
diagramDisplayName
lbox	true

642

revision
641

3

4

Scroll Only

System Controller (SC), U5
USB-to-JTAG/UART-FTDI, U4
USB-to-UART-FTDI, U12
UART Level Shifter, U8
SDIO Port Expander, U2
I²C Repeater, U7
Power Input Protection, U11
DCDC, U3
USB Power Supply Switch, U1
Reset / Push button, S1, S6
4x Dip Switch, S2
LED D1 (red), D2 (green)
LED D3 (red), D4 (green)
Ethernet Jack, J14
Samtec Razor Beam™ LSHM-150/130 B2B connector, JB1, JB2, JB3
Assembly option for VG96 Connector, J1, J2
Power Jack, J13
microSD Card Socket, J3
Bank IO Voltages jumper, J5, J8, J9, J10
Mini USB Type B Jack, J4 (FT2232H), J21 (FT230XQ)
USB Host Connector, J6 (USB A) or J12 (Micro USB)

Initial Delivery State

Page properties

hidden	true
id	Comments

Note

Only components like EEPROM, QSPI flash can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

Scroll Title

anchor	Table_OV_IDS
title-alignment	center
title	Initial delivery state of programmable devices on the module

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Storage device name	Content	Notes
EEPROM	Preprogrammed with AMD Microchip programmer license	Do not overwrite!
System Controller	Preprogrammed with Firmware	Visit TEB2000 Firmware for further information.

Signals, Interfaces and Pins

Page properties

hidden	true
id	Comments

For subsection examples see: <Series Name> TRM Template section examplesexamples#%3CSeriesName%3ETRMTemplatesectionexamples-Signals,InterfacesandPins

Note
Table with all connectors and Designator List of different interfaces per connector IO CNT (for FPGA IOs where functionality can be changed by customer)

Connectors

Scroll Title

anchor	Table_SIP_C
title-alignment	center
title	Board Connectors

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Connector Type	Designator	Interface	IO CNT	Notes
VG96	J1	JB1 - IO	48 SE / 24 DIFF	Pin Header	J7	JB1 - Battery Voltage	1
VG96	J1	JB3 - IO	36 SE / 18 DIFF
VG96	J1	B2B/SC - I²C	2
Micro USB Type A/B ¹⁾	J12	JB3 - USB 2.0 OTG	2
RJ-45 Ethernet	J14Ethernet	B2B - ETH	8
RJ-45 Ethernet	J14	U5 SC - ETH LED	4
VG96	J2	JB2 - IO	66 65 SE / 33 32 DIFF
VG96	J1J2	JB3 SC - IO	36 SE / 18 DIFF16
Mini USB Type B	J21	SC - USB 2.0	2
microSD Card socket	J3	SDIO	SDIO ²⁾
Mini USB Type B	J4	FTDI	USB Type A ¹⁾	J6	JB3 - USB 2.0 OTG	32
Micro USB Type A /B ¹⁾	J12J6	JB3 - USB 2.0 OTG	32
VG96B2B	J2JB1	SC J1 - IO 16	48 SE / 24 DIFF
B2B	JB2	JB1	SC - JTAG2 x UART or 4 x IO	4
B2B	JB2	SC - Reset	1	Mini USB Type B	J4	SC - USB 2.0	2	Mini USB Type B	J21	SC - USB 2.0	JB1	I2C or 2 x IO	2
B2B	JB1	SC - IO	2
B2B	JB1	SDIO	SDIO ²⁾ or 6 x IO2
B2B	JB1	SC ETH - UARTMDI	2ETH
B2B	JB1JB2	SC J2 - UART	2	IO	65 SE / 32 DIFF
B2B	JB2	microSD Card socket ²⁾	J3	SC - SDJTAG	6	microSD Card socket ²⁾	4
B2B	JB2J3	SC - SDReset	61
VG96B2B	J1	JB2	2 x LED or 2 x IOSC - I²C	2
B2B	VG96JB3	J1	JB1 - I²C	- IO	36 SE / 18 DIFF
B2B	JB3	USB	USB2

¹⁾ Depending on the variant only one of the USB connectors is assembled.
²⁾ Depending on firmware microSD Card socket is connected to SC or SoM. Refer to TEB2000 CPLD Firmware for further information.

Test Points

Page properties

hidden	true
id	Comments

you must fill the table below with group of Test Point which are indicated as TP in a schematic. If there is no Test Point remarked in the schematic, delete the Test Point section.

Example:

Test Point	Signal	Notes¹⁾
TP1	PWR_PL_OK

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

Scroll Title

anchor	Table_SIP_TPs
title-alignment	center
title	Test Points Information

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Test Point	Signal

Direction ¹⁾

Notes
TP1	5VIN

IN


TP2	5VIN

IN


TP3	VIN

IN


TP4	VIN

IN


TP5	3.3V

OUT


TP6	3.3V

OUT


TP7	VCCIOA

IN


TP8	VCCIOA

IN


TP9	VCCIOB

IN


TP10	VCCIOB

IN


TP11	VCCIOC

IN


TP12	VCCIOC

IN


TP13	VCCIOD

IN


TP14	VCCIOD

IN


TP15	M1.8VOUT

IN


TP16	M1.8VOUT

IN


TP17	M3.3VOUT

IN


TP18	M3.3VOUT

IN


TP19	UART_VBUS

IN


TP20	UART_VBUS

IN


TP21	VCCJTAG

IN


TP22	VCCJTAG

IN


TP23	3.3V_SD

OUT


TP24	3.3V_SD

OUT


TP25	USB-VBUS_R

OUT


TP26	USB-VBUS_R

OUT


TP27	ETH-VCC

IN


TP28	ETH-VCC

IN


TP29	Vbus

IN


TP30	Vbus

IN


TP31	CM1

IN


TP32	CM0

IN


TP33	MIO0

IN


TP34	JTAGEN

IN

¹⁾ Direction:

IN: Input from the point of view of this board.

OUT: Output from the point of view of this board.

On-board Peripherals

Page properties

hidden	true
id	Comments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection by assigning advance link using: #NameOfTheSection

Example:

Chip/Interface	Designator	Connected To	Notes
ETH PHY	U10	B2B connector J1 SoC MIO	Gigabit ETH PHY

Scroll Title

anchor	Table_OBP
title-alignment	center
title	On board peripherals

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Chip/Interface	Designator	Connected To	Notes
System Controller	U5	SoMB2B Connector FTDI (FT2232H) U4 FTDI (FT230XQ) U12 SD Port Expander U2 Push button S1Push button S6 DIP Switch S2 All LEDs	Visit TEB2000 CPLD Firmware for further information.
FTDI FT2232H	U4	SC J4	JTAG/UART for ApplicationEEPROM
U10	FTDI	Preprogrammed with AMD programmer license. Do not overwrite!	FTDI FT230XQ	U12	SC J21	UART for HSS/System Boot
Oscillator EEPROM	U6U10	U4 FTDI	Preprogrammed with Microchip programmer license. Do not overwrite!12 MHz
SD IO Port Expander	U2	SC Via JB1 B2B connector to SoMB2B Connector JB1 microSD Card J3
I2C Repeater	U7	VG96 J1 B2B JB1 SC U5
Oscillator	U6	FTDI U4	12 MHz

Page properties

hidden	true
id	Comments

For example subsections see: <Series Name> TRM Template section examplessection examples#%3CSeriesName%3ETRMTemplatesectionexamples-On-boardPeripherals

Configuration and System Control Signals

Page properties

hidden	true
id	Comments

Overview all Controller signals, like Reset, Boote Mode, JTAG Interface(Connector or USB In case of FTDI)...
In case it's connected to CPLD always link to CPLD description and add not from the current implementation here(in case it's available)

Scroll Title

anchor	Table_OV_CNTRL
title-alignment	center
title	Controller signal.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Signal Name	Connector.Pin	Direction¹⁾	Description
S1	S1.2 / S1.4	IN	Push button ²⁾
SRST	S6.2 / S6.4	IN	Push button
SRST	JB2.56	OUT	Push button
CM1	S2.8	IN	DIP Switch ²⁾
CM0	S2.7	IN	DIP Switch ²⁾
JTAGEN	S2.6	IN	DIP Switch ²⁾
MIO0	S2.5	IN	DIP Switch ²⁾
VCCIOA	J5.2	OUTIN	SoM IO Bank supply ³⁾
VCCIOB	J8.2	OUTIN	SoM IO Bank supply ³⁾
VCCIOC	J9.2	OUTIN	SoM IO Bank supply ³⁾
VCCIOD	J10.2	OUTIN	SoM IO Bank supply ³⁾
SD_CD	J3.9	IN	SD Card socket Detect Signal
VBUS_V_EN	JB3.54	IN	Enables USB Host Bus Voltage
USB-VBUS	JB3.56	OUT	Signal to SoM
RESIN	JB2.17	OUT	Reset signal ²⁾
EN1	JB1.27	OUT	Power enable signal ²⁾
PGOOD	JB1.29	INOUT	Power good and/or Boot mode select signal ²⁾
MODE	JB1.31	INOUT	Boot mode select signal ²⁾
NOSEQ	JB1.8	INOUT	Power Management and/or Select JTAG target on the SoM ²⁾
PROGMODE	JB1.90	INOUT	Select JTAG target on the SoM ²⁾
MIO14 / MIO15	JB1.91 / JB1.86	INOUT	UART to SoM (FT2230H) ²⁾
MIO12 / MIO13	JB1.100 / JB1.98	INOUT	UART to SoM (FT230XQ) ²⁾
MIO10-SCL / MIO10 MIO10-SDA / MIO11	J1A.A1 / J1A.A2	INOUT	I2C bus ²⁾	J1A.A1 / JB1.96 J1A.A2 / JB1.94	INOUT	I2C bus ²⁾
TMS_B / TDI_B / TDO_B / TCK_B	JB2.94 / JB2.96 / JB2.98 / JB2.100	Signal-dependent	JTAG configuration and debugging interface. JTAG reference voltage: VCCJTAG

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

²⁾ Firmware dependent. Refer to TE0703 TEB2000 CPLD - CC703SFirmware for further information.
³⁾ Select 1.8V or 3.3V via jumper. Refer to 4 x 5 Module Integration Guide for further information.

Power and Power-On Sequence

Page properties

hidden	true
id	Comments

Enter the default value for power supply and startup of the module here.

Order of power provided Voltages and Reset/Enable signals

Link to Schematics, for power images or more details

Power Rails

Page properties

hidden	true
id	Comments

List of all power rails which are accessible by the customer

Main Power Rails and Variable Bank Power

Scroll Title

anchor	Table_PWR_PR
title-alignment	center
title	Module power rails.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail Name/ Schematic Name	Connector.Pin	Direction¹⁾	Notes
5VIN	J13.1	IN
5VIN	J2A.A1 / J2A.A2	OUT
3.3V	J1C.C31 / J2C.C31 / JB1.2 / JB1.4/ JB1.6/ JB1.14/ JB1.16 / JB2.1 / JB2.3 / JB2.5 / JB2.7	OUT
USB-VBUS_R	J6.1 / J12.1 /	OUT
USB-VBUS	JB3.56	OUT
M1.8VOUT	JB1.40	IN
M1.8VOUT	J5.3 / J8.3 / J9.3 / J10.3	OUT
M3.3VOUT	JB2.9 / JB2.11	IN
M3.3VOUT	J5.1 / J8.1 / J9.1 / J10.1 / J1C.C32 / J2C.C32	OUT
VCCJTAG	JB2.92	IN
ETH-VCC	JB1.13	IN
ETH-VCC	J14A.1	OUT
VCCIOA	JB1.10 / JB1.12 / J1B.B1	OUT	Selection via J5 ²⁾
VCCIOB	JB2.2 / JB2.4 / J1B.B32	OUT	Selection via J8 ²⁾
VCCIOC	JB2.6 / J2B.B32	OUT	Selection via J9 ²⁾
VCCIOD	JB2.8 / JB2.10 / J2B.B1	OUT	Selection via J10 ²⁾

¹⁾ Direction:

- IN: Input from the point of view of this board.
- OUT: Output from the point of view of this board.

²⁾ Select 1.8V or 3.3V via jumper. Refer to 4 x 5 Module Integration Guide for further information.

Recommended Power up Sequencing

Page properties

hidden	true
id	Comments

List baseboard design hints for final baseboard development.

Scroll Title

anchor	Table_BB_DH
title-alignment	center
title	Baseboard Design Hints

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Sequence	Net name	Recommended Voltage Range	Pull-up/down	Description	Notes
0	-	-	-	Configuration signal setup.	See Configuration and System Control Signals.
1	5VIN

5V

5 V (± 5 %)

-

Main Power supply.

Carrier and SoM power supply.
Minimal 1 A, maximal 4A.

Power consumption depends mainly on design and cooling solution.

2

M3.3VOUT / M1.8VOUT

3.3 V (± 3 %) /
1.8 V (± 3 %)

-

SoM generated

voltage,
which signals operational readyness of the SoM

output voltages.

These voltages can be used

to supply bank voltages,
to supply periphery and/or
as power good signal to enable external power regulators.

Important: Consider maximum power consumption.

3

-

Apply voltages to Carrier powered external IO
when voltages under point 2 are present.

Board to Board Connectors

Page properties

hidden	true
id	Comments

This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series,
For example: 6 x 6 SoM LSHM B2B Connectors
Include Page
PD:6 x 6 SoM LSHM B2B ConnectorsPD:
6 x 6 SoM LSHM B2B Connectors

Include Page

	PD:4 x 5 SoM LSHM B2B ConnectorsPD:
	4 x 5 SoM LSHM B2B Connectors

Technical Specifications

Page properties

hidden	true
id	Comments

List of all power rails which are accessible by the customer

Main Power Rails and Variable Bank Power add boarder one time maximum Rating (Board will damaged)

This Table shows the real values and reasons for the limits, so that they do not get lost.

Power Rail / Schematic Name	Description	Min	Max	Unit	Notes	Reason for the limit
SD Card Limits	Limits for 3.3 V and 1.8 V SD Card supply. Only Recommanded values are given.	Rec: 2.7 1.7	Rec: 3.6 1.95	V	Supplied by M3.3VOUT and optional by M1.8VOUT, when SD IO Jumper is to 1.8 V.

5VIN	Carrier supply voltage rail before the input protection.	Abs: -40 Rec: 4.75	Abs: 60 Rec: 5.5	V	Voltages outside of the range 4.06 to 5.58 V will trigger the input protection. Rec.= USB Bus Voltage
VCCIOA	SoM IO Bank Voltage.	-	-	V	Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO.
VCCIOB	SoM IO Bank Voltage.	-	-	V	Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO.
VCCIOC	SoM and Carrier Sc IO Bank 2 voltage.	Abs: -0.5 Rec: 1.14	Abs: 3.75 Rec: 3.6	V	Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO. System Controller Limits: Abs: -0.5 to 3.75 Rec VCC: 2.375 to 3.6 Rec IO: 1.14 to 3.6	Limited by Absolute Maximum Values of the Sc.
VCCIOD	SoM IO Bank Supply Voltage.	-	-	V	Voltage can be supplied by M1.8VOUT, M3.3VOUT or externally by VG96 IO.
M1.8VOUT	SoM supplied voltage. Range based on Carrier (± 3 %). Consult SoM requirements.	Abs: -0.3	Abs: 4.9	V	When suppling SC IO Bank 2 via VCCIOC, the limit ist -0.5 to 3.75 V.
M3.3VOUT	SoM supplied voltage.	Abs: -0.5	Abs: 4.6	V	When suppling SC IO Bank 2 via VCCIOC, the limit ist -0.5 to 3.75 V. When suppling a SD Card, SD Card limits are 2.7 to 3.6 V.	M3.3VOUT is limited by U2 in the range -0.5 to 4.6 V.
VBAT	Dependent on SoM requirements.	-	-	V
VCCJTAG	SoM supplied JTAG Reference Voltage for Carrier SC IO Bank 3.	Abs: -0.5	Abs: 3.75	V	System Controller Limits: Abs: -0.5 to 3.75 Rec VCC: 2.375 to 3.6 Rec IO: 1.14 to 3.6	Limited by Absolute Maximum Values of the Sc.
ETH-VCC	ETH Bias Voltage from SoM.	-	-	V

Absolute Maximum Ratings ^*)

Scroll Title

anchor	Table_TS_AMR
title-alignment	center
title	Absolute maximum ratings

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
style
widths
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail / Schematic Name	Description	Min	Max	Unit
5VIN	Main input power supply	-0.3	60	V
VCCIOA ^{1) 2)}	Module power supply.	-	-	V
VCCIOB ^{1) 2)}	Module power supply.	-	-	V
VCCIOC ^{1) 2)}	Module and Carrier power supply.	-0.5	3.75	V
VCCIOD ^{1) 2)}	Module power supply.	-	-	V
M1.8VOUT	Module and carrier power supply.	-0.3	1.95	V
M3.3VOUT	Module and carrier power supply.	-0.3	3.6	VVBAT ¹⁾	Module battery power supply.	-	-	V
VCCJTAG	JTAG Reference Voltage	-0.5	3.75	V
ETH-VCC	Power supply for ETH connection.	-	-	V

¹⁾ Module-dependent.
²⁾ Voltage is intended to be supplied by M1.8VOUT or M3.3VOUT but can also be supplied externally via VG96 connection.

^*) Stresses beyond those listed under under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under under Recommended Operating ConditionConditions. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.

Recommended Operating Conditions

This TRM is generic for all variants. Temperature range can differ depending on assembly variant. The voltage ranges between variants should not be affected (exceptions are possible, depending on custom request)

Temperature Range:

This carrier board is capable of being operated at industrial-grade temperatures, which cover at least the range of -40 °C to 85 °C.

Please check the operating temperature range of the mounted SoM and peripheral devices, which determines the operating temperature range of the overall system.

The Operating operating temperature range depends on soft- & hard- ware software and hardware design and cooling solution. Please contact us for options.

Voltage Rails:

Scroll Title

anchor	Table_TS_ROC
title-alignment	center
title	Recommended operating conditions.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Power Rail / Schematic Name	Description	Min	Max	Unit	Notes
5VIN	Main input power supply	4.75	5.25	V
VCCIOA ^{1) 2)}	Module power supply.	-	-	V
VCCIOB ^{1) 2)}	Module power supply.	-	-	V
VCCIOC ^{1) 2)}	Module and Carrier power supply.	1.14	3.6	V
VCCIOD ^{1) 2)}	Module power supply.	-	-	V
M1.8VOUT	Module and carrier power supply.	1.746	1.854	V
M3.3VOUT	Module and carrier power supply.	3.201	3.399	V	VBAT ¹⁾	Module battery power supply.	-	-	V
VCCJTAG	JTAG Reference Voltage	1.14	3.6	V
ETH-VCC	Power supply for ETH connection.	-	-	V

Physical Dimensions

Carrier size: 100 mm x 64.5 mm.
Note that few parts are slightly hanging over the PCB edge. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 8 mm.
PCB thickness: 1.64 64 mm ± 10 %.

Page properties

hidden	true
id	Comments

In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note
For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guideline" .

Scroll Title

anchor	Figure_TS_PD
title-alignment	center
title	Physical Dimension

Scroll Ignore
Image Modified

Scroll Only

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Image Modified

Currently Offered Variants

Page properties

hidden	true
id	Comments

Set correct link to the shop page overview table of the product on English and German.

Example for TE0706:

ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706

DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706

Scroll Title

anchor	Table_VCP_SO
title-alignment	center
title	Trenz Electronic Shop Overview

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Trenz shop TEB2000 overview page
English page	German page

Revision History

Hardware Revision History

Page properties

hidden	true
id	Comments

Set correct links to download Carrier, e.g. TE0706 REV02:

TE0706-02 -> https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/4x5_Carriers/TE0706/REV02/Documents

Note:

Date format: YYYY-MM-DD
Example:
Date Revision Changes Documentation Link
2020-11-25 REV02
Resistors R14 and R15 was replaced by 953R (was 5K1)
Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)
REV02

Hardware The hardware revision number can be found is on the PCB board together with adjacent to the module model number identifier, separated by the a dash.

Scroll Title

anchor	Figure_RV_HRN
title-alignment	center
title	Board hardware revision number.

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, objects are only linked.Image Added

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixedImage Added

Scroll Title

anchor	Table_RH_HRH
title-alignment	center
title	Hardware Revision History

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date	Revision	Changes	PCN Link	Documentation Link
2023-10-01	Initial Revision			REV01 Documentation

Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Document Change History

Page properties

hidden	true
id	Comments

Note this list must be only updated, if the document is online on public doc!
It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports

Scroll Title

anchor	Table_RH_DCH
title-alignment	center
title	Document change history.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date

Revision

Contributor

Description

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

Page info

infoType	Current version
prefix	v.
type	Flat
showVersions	false

Page info

infoType	Modified by
type	Flat
showVersions	false

<add TRM change list here>

01

Initial Release

--

all

Page info

infoType	Modified users
type	Flat
showVersions	false

--

Disclaimer

Include Page

	IN:Legal Notices
	IN:Legal Notices

Scroll Only

HTML
<style> .wiki-content .columnLayout .cell.aside { width: 0%; }</style>

Scroll pdf ignore

Custom_fix_page_content

Trenz Electronic Documentation

Versions Compared

Old Version 20

New Version Current

Key

Overview

Key Features

Block Diagram

Main Components

Initial Delivery State

Signals, Interfaces and Pins

Connectors

Test Points

On-board Peripherals

System Controller

FTDI FT2232H

FTDI

FT230XQ

EEPROM

SD IO Port Expander

I2C Repeater

Oscillator

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

Recommended Power up Sequencing

Board to Board Connectors

Technical Specifications

Absolute Maximum Ratings ^*)

Recommended Operating Conditions

Temperature Range:

Voltage Rails:

Physical Dimensions

Currently Offered Variants

Revision History

Hardware Revision History

Document Change History

Disclaimer

Table of contents

Trenz Electronic Documentation

Page History

Versions Compared

Old Version 20

New Version Current

Key

Overview

Key Features

Block Diagram

Main Components

Initial Delivery State

Signals, Interfaces and Pins

Connectors

Test Points

On-board Peripherals

System Controller

FTDI FT2232H

FTDI

FT230XQ

EEPROM

SD IO Port Expander

I2C Repeater

Oscillator

Configuration and System Control Signals

Power and Power-On Sequence

Power Rails

Recommended Power up Sequencing

Board to Board Connectors

Technical Specifications

Absolute Maximum Ratings *)

Recommended Operating Conditions

Temperature Range:

Voltage Rails:

Physical Dimensions

Currently Offered Variants

Revision History

Hardware Revision History

Document Change History

Disclaimer

Table of contents

Absolute Maximum Ratings ^*)