Page History

Design Name is always "TE Series Name" + Design name, for example "TE0720 Test Board"

Important General Note:

• Export PDF to download, if vivado revision is changed!

• Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

  • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

    • Figure template (note: inner scroll ignore/only only with drawIO object):

      Scroll Title
      anchor Figure_xyz title Text
      Scroll Ignore Create DrawIO object here: Attention if you copy from other page, use Scroll Only image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

      
      

    • Table template:

      • Layout macro can be use for landscape of large tables
      • Set column width manually (can be used for small tables to fit over whole page) or leave empty (automatically)

    • 
      

      Scroll Title
      anchor Table_xyz title Text
      Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true Example Comment 1 2

      
      

• ...

Notes :

• short description of the design

• Short Link of "Scroll only" macro:

  • Use short link the Wiki Resource page, for example: http://trenz.org/te0720-info

  • List of available short links: https://wiki.trenz-electronic.de/display/TI/Redirects

Notes :

• Add basic key futures, which can be tested with the design

• Vitis/Vivado 2023.2
• TEBF0808
• Linux
• USB
• ETH
• MAC from EEPROM
• PCIe
• SATA
• SD
• I2C
• RGPIO
• Display Port (DP)
• user LED access

Notes :

• add every update file on the download
• add design changes on description

• add known Design issues and general notes for the current revision
• do not delete known issue, add fixed version time stamp if issue fixed

Notes :

• list of software which was used to generate the design

Notes :

• list of hardware which was used to generate the design
• mark the module and carrier board, which was used tested with an ^*

^*used as reference

^*used as reference

Notes :

• content of the zip file

Notes :

• prebuilt files
• Template Table:

  • 
    

    Scroll Title
    anchor Table_PF title-alignment center title Prebuilt files
    Scroll Table Layout orientation portrait sortDirection ASC repeatTableHeaders default style widths sortByColumn 1 sortEnabled false cellHighlighting true File File-Extension Description BIF-File *.bif File with description to generate Bin-File BIN-File *.bin Flash Configuration File with Boot-Image (Zynq-FPGAs) BIT-File *.bit FPGA (PL Part) Configuration File Boot Script-File *.scr Distro Boot Script file DebugProbes-File *.ltx Definition File for Vivado/Vivado Labtools Debugging Interface Debian SD-Image *.img Debian Image for SD-Card Diverse Reports --- Report files in different formats Device Tree *.dts Device tree (2 possible, one for u-boot and one for linux) Hardware-Platform-Description-File *.xsa Exported Vivado hardware description file for Vitis and PetaLinux LabTools Project-File *.lpr Vivado Labtools Project File MCS-File *.mcs Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only) MMI-File *.mmi File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only) OS-Image *.ub Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk) Software-Application-File *.elf Software Application for Zynq or MicroBlaze Processor Systems SREC-File *.srec Converted Software Application for MicroBlaze Processor Systems

    
    

• Important set new Vivado version link on every Design update of new vivado version!
• Set Link to download folder (Remove ../de/.. ../en/.. from url) for example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0712/Reference_Design/2018.2/test_board

• Basic Design Steps

• Add/ Remove project specific description

Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

Caution! Win OS has a 260 character limit for path lengths which can affect the Vivado tools. To avoid this issue, use Virtual Drive or the shortest possible names and directory locations for the reference design (for example "x:\<project folder>")

Note:

• Programming and Startup procedure

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Note:

• Add picture of HW Manager

• add notes for the signal either groups or topics, for example:
  

  Control:

  • add controllable IOs with short notes..

  Monitoring:

  • add short notes for signals which will be monitored only
  • SI5338 CLKs:
    • Set radix from VIO signals to unsigned integer. Note: Frequency Counter is inaccurate and displayed unit is Hz
    • expected CLK Frequency...
      

Note:

• Description of Block Design, Constrains... BD Pictures from Export...

Note:

• optional for Zynq / ZynqMP only

• add basic PS configuration

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design]

#System Controller IP
  #LED_HD SC0 J3:31
  #LED_XMOD SC17 J3:48 
  #CAN RX SC19 J3:52 B47_L2_P in
  #CAN TX SC18 J3:50 B47_L2_N out 
  #CAN S  SC16 J3:46 B47_L3_N out
#HDIO_SC1    K14
#HDIO_SC2    H13
#HDIO_SC3    H14
#HDIO_SC4    F13



#HDIO_SC0    J14
set_property PACKAGE_PIN J14 [get_ports BASE_sc0]
#HDIO_SC5    G13
set_property PACKAGE_PIN G13 [get_ports BASE_sc5]
#HDIO_SC6    J15
set_property PACKAGE_PIN J15 [get_ports BASE_sc6]
#HDIO_SC7    K15
set_property PACKAGE_PIN K15 [get_ports BASE_sc7]
#HDIO_SC10   A15
set_property PACKAGE_PIN A15 [get_ports BASE_sc10_io]
#HDIO_SC11   B15
set_property PACKAGE_PIN B15 [get_ports BASE_sc11]
#HDIO_SC12   C13
set_property PACKAGE_PIN C13 [get_ports BASE_sc12]
#HDIO_SC13   C14
set_property PACKAGE_PIN C14 [get_ports BASE_sc13]
#HDIO_SC14   E13
set_property PACKAGE_PIN E13 [get_ports BASE_sc14]
#HDIO_SC15   E14
set_property PACKAGE_PIN E14 [get_ports BASE_sc15]
#HDIO_SC16   A13
set_property PACKAGE_PIN A13 [get_ports BASE_sc16]
#HDIO_SC17   B13
set_property PACKAGE_PIN B13 [get_ports BASE_sc17]
#HDIO_SC18   A14
set_property PACKAGE_PIN A14 [get_ports BASE_sc18]
#HDIO_SC19   B14
set_property PACKAGE_PIN B14 [get_ports BASE_sc19]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc0]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc5]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc6]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc7]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc10_io]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc11]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc12]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc13]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc14]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc15]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc16]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc17]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc18]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc19]


# Audio Codec
#LRCLK		  J3:49 B47_L9_N
#BCLK		  J3:51 B47_L9_P
#DAC_SDATA	  J3:53 B47_L7_N
#ADC_SDATA	  J3:55 B47_L7_P

#LRCLK G14
set_property PACKAGE_PIN G14 [get_ports I2S_lrclk ]
#BCLK G15
set_property PACKAGE_PIN G15 [get_ports I2S_bclk ]
#DAC_SDATA E15
set_property PACKAGE_PIN E15 [get_ports I2S_sdin ]
#ADC_SDATA F15
set_property PACKAGE_PIN F15 [get_ports I2S_sdout ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_lrclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_bclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdin ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdout ]

• optional chapter separate

• sections for different apps

----------------------------------------------------------

FPGA Example

----------------------------------------------------------

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 2023.2 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

• Modified Files: blconfig.h, bootloader.c
• Changes:
  
  • Add some console outputs and changed bootloader read address.
  • Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 2023.2 xilisf_v5_11

• Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

----------------------------------------------------------

fsbl

TE modified 2023.2 FSBL

General:

• Modified Files: main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)

• Add Files: te_fsbl_hooks.h/.c (for hooks and board)

• General Changes: 
  
  • Display FSBL Banner and Device ID

Module Specific:

• Add Files: all TE Files start with te_*
  
  • READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
  • CPLD access
  • Read CPLD Firmware and SoC Type
  • Configure Marvell PHY

----------------------------------------------------------

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2023.2 FSBL

General:

• Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
• Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
• General Changes: 
  
  • Display FSBL Banner and Device Name

Module Specific:

• Add Files: all TE Files start with te_*
  
  • Si5338 Configuration
  • ETH+OTG Reset over MIO

zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

----------------------------------------------------------

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

• optional chapter separate

• sections for linux

• Add "No changes." or "Activate: and add List"

#no changes

/include/ "system-conf.dtsi"


/*------------------ gtr --------------------*/

//https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841716/Zynq+Ultrascale+MPSOC+Linux+SIOU+driver

/ {
  refclk3:psgtr_dp_clock {
          compatible = "fixed-clock";
          #clock-cells = <0x00>;
          clock-frequency = <27000000>;
  };

  refclk2:psgtr_pcie_usb_clock {
          compatible = "fixed-clock";
          #clock-cells = <0x00>;
          clock-frequency = <100000000>;
  };

  refclk1:psgtr_sata_clock {
          compatible = "fixed-clock";
          #clock-cells = <0x00>;
          clock-frequency = <150000000>;
  };

  //refclk0:psgtr_unused_clock {
  //        compatible = "fixed-clock";
  //        #clock-cells = <0x00>;
  //        clock-frequency = <100000000>;
  //};
};

&psgtr {
  clocks = <&refclk1 &refclk2 &refclk3>;
  /* ref clk instances used per lane */
  clock-names = "ref1\0ref2\0ref3";
};



/*-------------------- SD0 eMMC ----------------*/
&sdhci0 {
    // bus-width
    bus-width = <8>;
};

/*-------------------- SD1 SD2.0 ----------------*/
&sdhci1 {
    // disable-wp;
    no-1-8-v;
};


/*------------------- USB --------------------*/
&dwc3_0 {
    //status = "okay";
    dr_mode = "host";
    //snps,usb3_lpm_capable;
    //snps,dis_u3_susphy_quirk;
    //snps,dis_u2_susphy_quirk;
    //phy-names = "usb2-phy","usb3-phy";
    //maximum-speed = "super-speed";
};


/*------------------ ETH PHY --------------------*/
&gem3 {
    /delete-property/ local-mac-address;
    phy-handle = <&phy0>;

    nvmem-cells = <&eth0_addr>;
    nvmem-cell-names = "mac-address";

    phy0: phy0@1 {
        device_type = "ethernet-phy";
        reg = <1>;
    };
};


/*----------------- SATA PHY --------------------*/
&sata {

     ceva,p0-burst-params = <0x13084a06>;
     ceva,p0-cominit-params = <0x18401828>;
     ceva,p0-comwake-params = <0x614080e>;
     ceva,p0-retry-params = <0x96a43ffc>;
     ceva,p1-burst-params = <0x13084a06>;
     ceva,p1-cominit-params = <0x18401828>;
     ceva,p1-comwake-params = <0x614080e>;
     ceva,p1-retry-params = <0x96a43ffc>;

};


/*-------------------- QSPI ---------------------*/
&qspi {
    num-cs = <2>;

    flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0>, <1>;
        parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 2* 16MB --> dummy for all types of this QSPI type */

        spi-rx-bus-width = <4>;
        spi-tx-bus-width = <4>;
        // for variants populated with n25qu512
        spi-max-frequency = <108000000>; // max. frequency also depends on the QSPI chip
                                         // here 108MHz for N25Q512A (Fast Read Quad IO STR, 8 Dummy Cycles, quad SPI protocol)
        
        #address-cells = <1>;
        #size-cells = <1>;        
    };
};


/*------------------ I2C --------------------*/
&i2c0 {
    i2cswitch@73 { // u
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x73>;
        i2c-mux-idle-disconnect;
        i2c@0 { // MCLK TEBF0808 SI5338A, 570FBB000290DG_unassembled
            reg = <0>;
        };
        i2c@1 { // SFP TEBF0808 PCF8574DWR
            reg = <1>;
        };
        i2c@2 { // PCIe
            reg = <2>;
        };
        i2c@3 { // SFP1 TEBF0808
            reg = <3>;
        };
        i2c@4 {// SFP2 TEBF0808
            reg = <4>;
        };
        i2c@5 { // TEBF0808 EEPROM
            reg = <5>;
            eeprom: eeprom@50 {
                compatible = "microchip,24aa025", "atmel,24c02";
                reg = <0x50>;
                
                #address-cells = <1>;
                #size-cells = <1>;
                eth0_addr: eth-mac-addr@FA {
                  reg = <0xFA 0x06>;
                };
            };
        };
        i2c@6 { // TEBF0808 FMC
            reg = <6>;
        };
        i2c@7 { // TEBF0808 USB HUB
            reg = <7>;
        };
    };
    i2cswitch@77 { // u
        compatible = "nxp,pca9548";
        reg = <0x77>;
        i2c-mux-idle-disconnect;
        i2c@0 { // TEBF0808 PMOD P1
            reg = <0>;
        };
        i2c@1 { // i2c Audio Codec
            reg = <1>;
            /*
            adau1761: adau1761@38 {
                compatible = "adi,adau1761";
                reg = <0x38>;
            };
            */
        };
        i2c@2 { // TEBF0808 Firefly A
            reg = <2>;
        };
        i2c@3 { // TEBF0808 Firefly B
            reg = <3>;
        };
        i2c@4 { //Module PLL Si5338 or SI5345
            reg = <4>;
        };
        i2c@5 { //TEBF0808 CPLD
            reg = <5>;
        };
        i2c@6 { //TEBF0808 Firefly PCF8574DWR
            reg = <6>;
        };
        i2c@7 { // TEBF0808 PMOD P3
            reg = <7>;
        };
    };
};

Identical to adjustments made in zynqmp_fsbl

te_* files are identical to files in "<project folder>\sw_lib\sw_apps\zynqmp_fsbl\src" except for the PLL files (SI5345) which depend on PLL revision. The PLL files may have to be copied again manually into the appropriate petalinux folder "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw\fsbl-firmware\git\lib\sw_apps\zynqmp_fsbl\src"
Petalinux Troubleshoot#Petalinux2023.2

• Add description for other Software, for example SI CLK Builder ...
• SI5338 and SI5345 also Link to:
  • Si5345
  • Si5338

• Note this list must be only updated, if the document is online on public doc!
• It's semi automatically, so do following
  

  • Add new row below first

  • Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

  • Metadata is only used of compatibility of older exports