Page History
When Xilinx SDK openopens, you should:
1) Set the repositories for device driver of custom block used in SDK Microblaze project
...
- click Xilinx "Xilinx Tools" and then "Repositories"
| Scroll pdf title | ||
|---|---|---|
| ||
- after this a pop-up "Preferences" will appears
...
...
| Scroll pdf title | ||
|---|---|---|
| ||
- click "Apply"
- you should click "OK"
- after this you must wait until the building procedure ended.
2) Create an
...
- You should click "File" >"New" > "Project"
| Scroll pdf title | ||
|---|---|---|
| ||
...
...
...
...
...
| Scroll pdf title | ||
|---|---|---|
| ||
...
...
"
...
...
reference-TE0300
...
_
...
hw
...
_platform"
...
| Scroll pdf title | ||
|---|---|---|
| ||
3) Create
...
- You should click "File" >"New" > "Project"
- a pop up "New Project" will appears
- click"Xilinx">"Board Support Package", then next
- a new pop up "New Board Support Package Project" will appear;
| Scroll pdf title | ||
|---|---|---|
| ||
...
...
...
| Scroll pdf title | ||
|---|---|---|
| ||
- after this you should click "standalone" and set "stdin" and "stdout" to "rs232" or "debug_module"
- you should select "rs232" if you desire to use an external UART
- you should select "debug_module" if you desire that the XMD_UART works as local UART through the JTAG connection
| Tip |
|---|
| Demo program (running on MicroBlaze) will work even in case the UART port is left unconnected: it is not necessary to use a USB/Uart converter or Uart port on a PC, if you are using XMD UART HDL block. |
| Scroll pdf title | ||
|---|---|---|
| ||
- after this you should click drivers to verify that all Microblaze components are supported by the driver in the repository C:\XilinxProject\TE-EDK-IP; click "OK" and the pop-up should dissapears;
| Scroll pdf title | ||
|---|---|---|
| ||
...
...
...
"
...
standalone_bsp_0"
...
...
| Scroll pdf title | ||
|---|---|---|
| ||
...
4) Recreate the "Application Project"
...
"demo"
Overview
Content Tools