Page History
...
Note
Before The mounting the KK0807-02, apply of the heatspreader must be done with care. We do not take over guarantee for self assembly.
Compatibility
This heatspreader can be mounted on all TE0807 Revision 2 (TE0807-02-...).
Accessories
Gap Filler: Berquist GF3500S35-00-60-50CC
Gun: 50CC MANUAL GUN 1:1 RATIO SS95407
Tool: PH1 Philips crosshead torque screwdriver
Assembly
- Apply Gap Filler in at least approx.
...
- 2 mm thickness to the following
...
- components:
Scroll Pagebreak - Align KK0807-02 carefully and press on lightly:
(example TE0745-02 with KK0745-02) Set the torque screwdriver to 0.5Nm.
Insert the PH1 Philips crosshead bit and fix it crosswise from below with the four M3x6mm pan-head screws.
(example TE0745-02 bottom)
Include Page | ||||
---|---|---|---|---|
|
The LED D1 must remain free and must not be covered by GapFiller.DE:
Vor der Montage des KK0807-02 wird auf folgende Stellen mindestens ca. 2mm GapFiller aufgetragen:
Die Leuchtdiode D1 muss frei bleiben und darf nicht von GapFiller verdeckt werden.
Overview
Content Tools