Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

CompanyTrenz Electronic GmbH
PCN NumberPCN-20240124
TitleTE0600-03 to TE0600-04 Hardware Revision Change
SubjectHardware Revision Change
Issue Date

2024-02-0106

Products Affected

This change affects all Trenz Electronic TE0600 SoMs: TE0600-03*.

...

Type: Schematic Change

Reason: EOL of Component.

Impact: None. Minor changes in electrical characteristics.

...

Type: Schematic Change

Reason: EOL of Component.

Impact: None. Increased current output capability. Minor changes in electrical characteristics.

...

Reason: Increase flexibility.

Impact: None.

#6

...

Improved led (D1) driving circuit via adding MOSFET (T1) and resistor (R84) and changed 120 Ohm resistor (R36) to 240 Ohm.

Type: Schematic Change

Reason: Improve led circuit.

...

Reason: Follow AMD recommendation.

Impact: None.

...

#8 Changed diode (D3) from BAT54VV,115 to two separated diodes (D2, D3) BAT54A,215.

Type: Schematic Change

Reason: BOM optimization.

Impact: None.

...

#9 Changed 2.2 kOhm resistors (R56, R57, R58) to 2.4 kOhm.

Type: BOM Change

Reason: Follow AMD recommendation.

Impact: None.

...

#10 Pulled-down board revision signal "BR0" (FPGA U5, pin P17) and updated board revision documentation.

Type: Schematic Change

Reason: Update revision information.

Impact: None. Custom design needs to be updated by customer in cases where board revision signals are used.

...

#11 Added testpoints (TP11...TP14, TP23...TP28).

Type: PCB Change

Reason: Improve voltage and system monitoring.

Impact: None.

...

#12 Changed fiducials to standard fiducial type.

Type: Schematic Change

Reason: Use standard fiducials.

Impact: None.

...

#13 Changed stacked vias to staggered vias.

Type: PCB Change

Reason: Reliability improvement.

Impact: Reliablity improvement.

...

#14 Signal trace lengths changed.

Type: PCB change

Reason: Result of changes above.

Impact: Changed trace length have to be taken into account in existing designs.

...

#15 Updated B2B documentation.

Type: Documentation Update

Reason: Documentation Improvement.

Impact: None.

...

#16 Renamed document sheets.

Type: Documentation Update

Reason: Documentation Improvement.

Impact: None.

...

#17 Updated legal notices, revision history, block and power diagram. Updated page count and order. 

Type: Documentation Update

...

Production Shipment Schedule

From August September 2024, after old stock is gone. If the new revision is not suitable for your application and still the former revision of the board is needed, please contact us.

...