Page History
...
| Scroll pdf title | ||
|---|---|---|
| ||
|
Trenz Electronic recommends to mate the standard B2B connectors with the following ones:
...
Ordering codes for connectors JM4 / JM5 and their mating connectors are given in the table below.
| Scroll pdf title | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||
|
...
The mating height of connectors 6060-080-46-00-10-10-PPTR and 6110-080-00-10-PPTR is 6mm.
Connectors JM4 and JM5 can mate also with any 1.27 mm (50 mil = .050") pitch male header connectors with up to 2 × 40 pins.
...
| Scroll pdf title | ||
|---|---|---|
| ||
|
Hardware Design Requirement
PUDC_B (pull-up during configuration, active Low) pin in TE0320 modules is hard-wired high, determining user-I/O pins to float before and during configuration. Turning off pull-up resistors in hot-swap or hot-insertion applications, disables potential current paths to the I/O power rail. However, external pull-up or pull-down resistors may be required on each individual I/O pin depending on the specific application.
Overview
Content Tools