When Xilinx SDK openopens, you should:
1) Set the repositories for device driver of custom block used in SDK Microblaze project
...
- click Xilinx "Xilinx Tools" and then "Repositories"
Scroll pdf title |
---|
title | XilinxSDKProjectRepositories |
---|
|
Image Removed |
- after this a pop-up "Preferences" will appears
...
title | Add Reference Repositories for custom driver of custom block/device |
---|
...
...
Scroll pdf title |
---|
title | Add reference with double indirection (as required by Xilinx SDK) |
---|
|
Image Removed |
- click "Apply"
- you should click "OK"
- after this you must wait until the building procedure ended.
2) Create an
...
"
...
Scroll pdf title |
---|
title | Xilinx SDK New Project |
---|
|
Image Removed |
...
Hardware
...
Platform Specification
...
Project
...
Scroll pdf title |
---|
title | Xilinx SDK HW Project New Wizard 1 |
---|
|
Image Removed |
...
"
...
"
...
Image Removed
...
reference-TE0300
...
_
...
hw
...
_
...
platform"
...
Scroll pdf title |
---|
|
Image Removed |
3) Create a
...
"
...
Board
...
Support Package Project
...
Scroll pdf title |
---|
title | New Xilinx Board Support Packages |
---|
|
Image Removed |
...
"
...
"
...
standalone_bsp_0"
...
Scroll pdf title |
---|
|
Image Removed |
...
- you should select "rs232" if you desire to use an external UART
- you should select "debug_module" if you desire that the XMD_UART works as local UART through the JTAG connection
Tip |
---|
Demo program (running on MicroBlaze) will work even in case the UART port is left unconnected: it is not necessary to use a USB/Uart converter or Uart port on a PC, if you are using XMD UART HDL block. |
Scroll pdf title |
---|
title | BSP rs232 or debug_module |
---|
|
Image Removed |
- after this you should click drivers to verify that all Microblaze components are supported by the driver in the repository C:\XilinxProject\TE-EDK-IP; click "OK" and the pop-up should dissapears;
Scroll pdf title |
---|
title | BSP drivers for Microblaze components |
---|
|
Image Removed |
- after you have verified that all Microblaze components are supported by a driver, right click the "standalone_bsp_0" folder in "Project Explorer" and
- the pop-up "Properties for standalone_bsp_0" should appears
- click "Project References"
- you must verify that "standalone_bsp_0" references to "reference-TE0300_hw_platform":if is not checked you must check the box.
Scroll pdf title |
---|
title | "standalone_bsp_0" Project References |
---|
|
Image Removed |
- click "OK";
- after this, you should wait until the SDK compile the added files and a message 'Finished building libraries' appears
Image Removed
...
4) Recreate the "Application Project
...
" "demo"