Page History
This Trenz Electronic Starter Kit Kit consists of a TE0803 module on a TEBF0808 base board in Mini-ITX Enclosure. See Shop Link shop link for detailed content.
Wiki Links
...
Kit specific
- TEBF0808 Getting Started - Summarised documentation of Connectors, DIPs, LEDs
- TE081x and TE080x Starterkit montage instruction - Assembly instructions if you want to assemble it yourself
Module and Carrier separately
- TE0803 - UltraSoM+ - Wiki with TRM, reference projects, application notes and more
- TE0803 Resources - Links to all TE0803 resources
- TEBF0808 - Wiki with TRM, application notes and more
- TEBF0808 Resources - Links to all TEBF0808 resources
- TE0790 - XMOD
...
- - Wiki with
...
- TRM, application notes and more
- TE0790 Resources - Links to all TE0790 resources
- AMD Development Tools - Short instructions for Vivado, SDK, SDSoC
- Project Delivery - AMD devices - General descriptions of reference designs and content
Download Links
- TE0803 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more
- TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more
- TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more
- TE Master Pinout - Excel
...
- sheet as pinout viewer and XDC
...
- generator
Shop Links
...
- contains prices, available stock, disposability, scope of delivery and more
AMD
...
Software and Driver
...
- AMD Design Software with JTAG drivers and documentation
...
...
...
- - All
...
- AMD Software, Device Models and Libraries
...
Getting Started
| Warning |
|---|
| WARNING: Do not change XMOD DIP-Switch settings on TEBF0808. Do not swap the XMOD adapters the one marked with green dot must be closer to the SoM |
Connect mains power and set power switch to on.
- Connect mini USB cable to host PC. (Cable from XMOD on marker 25 of TEBF0808-REV2 Component Location picture, the one with green dot, closer to the SoM)
- Insert SD-Card with pre-loaded content into SD-Card slot.
- Open Serial Console:
- COM Port: for correct number see device manager
- Speed:115200
- Press Core V1 Mini-ITX case power on button.
- Linux login:
- User Name:root
- Password:root
Important Notes
For ES1 only:
- activate beta device see: FAQ - How can I activate beta devices?
Starter Kit Cable Connection
Starter Kit will be shipped with all cable connected.
ATX Power
Enclosure USB
Enclosure FAN1 and HDAUDIO
XMOD
Module
Power Button and HDD LED
Reset Button and Power LED
...
Support
- For support, please go to http://forum.trenz-electronic.de/ or contact support@trenz-electronic.de
Overview
Content Tools