Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Before driver installation

Note
Insert the TE USB FX2 module and then check your VID/PID in device manager (devmgmt.msc > properties > details > Hardware Ids).

Generation 2

...

Device driver files

...

Generation 2 device drivers are provided by DEWESoft and can also be downloaded from here or here.

Generation 3

...

Device driver files

...

...

Documentation

Description

The driver package contains many folders. During installation, the user shall specify the folder according to the following table.

Scroll pdf title
titleReccommended device driver folder depending on operating system.


host operating system
(Microsoft Windows )

device driver folder

automatic/online
installation/update

2000

MS-Windows-2000.recommended

not available

XP

MS-Windows-XP.recommended

not available

Vista

MS-Windows-Vista+7

not available

7

MS-Windows-Vista+7

available

8

MS-Windows-Vista+7

available


Trenz Electronic device drivers are derived from the original Cypress generic USB device drivers, distributed with the Cypress SuiteUSB 3.4 (or later).
Driver installation on Microsoft Window 7 and Microsoft Window 8 can be performed automatically (on-line). It can happen that the first online driver installation attempt fails; in this case the user shall just force a retry (the second attempt normally works!). See section 2.1.2.3.2 Force the online search of USB Drivers Installation - User Manual.

Coexistence of Generation 2 and Generation 3 device drivers

Installation of both device drivers on the same host computer is normally possible.
Installation of both device drivers on the same host is not recommended under Microsoft Widows XP.
Please read USB Drivers Installation - User Manual (UM-drivers-TE_USB_FX2.pdf) for further details.

Cypress Generic USB driver: used in recovery boot for both Generation 2 and Generation 3

Device driver files

Documentation

Description

The driver package contains many folders. During installation, the user shall specify the folder according to the following table.

Scroll pdf title
titleReccommended device driver folder depending on operating system.

Device driver: original Cypress generic USB device drivers, distributed with the Cypress SuiteUSB 3.4 (or later).

host operating system
(Microsoft Windows )

device driver folder

automatic/online
installation/update

2000

MS-Windows-2000.recommended

not available

XP

MS-Windows-XP.recommended

not available

Vista

MS-Windows-Vista+7

not available

7

MS-Windows-Vista+7

available but it is another driver (1)

8

MS-Windows-Vista+7

available but it is another driver (1)


(1) Driver installation on Microsoft Window 7 and Microsoft Window 8 can be performed automatically (on-line). It can happen that the first online driver installation attempt fails; in this case the user shall just force a retry (the second attempt normally works!).  The driver installed is NOT the Cypress generic USB device drivers (distributed with the Cypress SuiteUSB 3.4). but one of this two signed Cypress driver (they can be downloaded from Microsoft Update Catalog):

  • Cypress - Other hardware - Cypress USB Generic Driver (3.4.7.000) for BI15xx where xx is 00,11,12,14, 32
  • Cypress - Bus Controllers and Ports - ND-tech USB Adapter (Cypress USB Generic Driver, version 3.4.1.20) (link)
Note

The second driver could be used but it is not recommended because two PIDs are possible.

Same VID and two different PIDs are possible (written in the corresponding .inf file):

  • Cypress VID (0x04B4) and PID (0x8613) (are typically shown)

  • Cypress VID (0x04B4) and ND-tech PID (0x1004) (it is shown if the board is disconnected and reconnected without power cycle after the firmware download onto EEPROM: this procedure is not correct)

WinUSB driver and Zadig (Generation2, Generation 3, Cypress default and/or custom firmware)

WinUSB driver and Zadig are advised if libusb or libusbx are the libraries used (instead of Cypress libraries (CyAPI.lib and CyUSB.dll) and the derived Trenz Electronic libraries (TE_USB_FX2_CyAPI.dll and TE_USB_FX2_CyUSB.dll)) by the user under Windows OS.

Generation 2, Generation 3 and Cypress drivers do not work with libusb or libusbx.

See WinUSB driver installation (libusb and libusbx). See also Zadig

Note
If libusb or libusbx are used (with WinUSB driver and/or Zadig), the software tools Cypress USB Console, Cypress USB Control Center , Python Open_FUT (Gen2), Python Open_FUT (Gen 3) and C# OpenFutNet could not be directly used. The code of these tools should be rewritten using libusb or libusbx instead of Cypress libraries (CyAPI.lib and CyUSB.dll) and the derived Trenz Electronic libraries (TE_USB_FX2_CyAPI.dll and TE_USB_FX2_CyUSB.dll). See Linux_FUT as a starting point for a new software tool using libusb or libusbx under Windows OS.


Info

These libraries are not yet officially supported under Windows, but they are already used with TE USB FX2 modules under Linux (see the comunity contribution Linux_FUT).

Zadig is not yet officially supported under Windows.