Page History
...
The IBERT core can be defined and generated using the Vivado built-in IP Cores. And with the generated example designs the IBERT Test can be implemented.
GT Ref Clock LocationSelection | GT Clock(MHz) | Clock Source | Notes | ||||||
---|---|---|---|---|---|---|---|---|---|
TE0712 | Quad_MGTREFCLK0 216 CLK0 | 125 | CLK2 | Si5338 Clock is connected to GT CLK2 input | |||||
TE0715 | Quad_MGTREFCLK1 112 CLK1 | 125 | CLK2 | Si5338 Clock is connected to GT CLK2 input | TE0741 | Quad_115 CLK0, Quad_116 CLK0 | 125 | Si5338 | |
TE0741 | MGTREFCLK1 116 | 125 | Both Quads can use same refclock |
Ref clock selection to use on board fixed clock from Si5338.
Step to Step to generate the IBERT core:
- Create a new IP Location.
- Double-click IBERT 7 series GTP (or GTX).
- Define the new IBERT. Set the LineRate, select the DataWidth, the Quad count, select the the Refclk and the Clock Source.
- Generate the Core.
- Open the Right-click the IP in the Sources view, choose "Open IP Example Design".
- Test
-
- A new project with the IBERT example design will be created and opened.
- Generate Bitstream. Open and view the completed design.
- Testing with Hardware
References
- LogiCORE IP Integrated Bit Error Ratio Tester (IBERT) for 7 Series GTP Transceivers v3.0 (pg133)
- LogiCORE IP Integrated Bit Error Ratio Tester (IBERT) for 7 Series GTX Transceivers v3.0 (pg132 )
..
Overview
Content Tools