Page History
...
Note
...
The mounting of the heatspreader must be done with care. We do not take over guarantee for self assembly.
Compatibility
This heatspreader can be mounted on all TE0807 Revision 2 (TE0807-02-...).
Accessories
Gap Filler: Berquist GF3500S35-00-60-50CC
Gun: 50CC MANUAL GUN 1:1 RATIO SS95407
Tool: PH1 Philips crosshead torque screwdriver
Assembly
- Apply Gap Filler in at least approx. 2 mm thickness to the following components: the KK0807-02, apply at least approx. 2mm GapFiller to the following areas:
The LED D1 must remain free and must not be covered by GapFiller.DE:
Vor der Montage des KK0807-02 wird auf folgende Stellen mindestens ca. 2mm GapFiller aufgetragen:
Die Leuchtdiode D1 muss frei bleiben und darf nicht von GapFiller verdeckt werden.Scroll Pagebreak - EN: Align KK0807-02 carefully and press on lightly:
DE: KK0807-02 ausrichten und leicht anpressen:
EN:
(example TE0745-02 with KK0745-02) Set the torque screwdriver at the assembly station to 0.5Nm.
DE: Den Drehmomentschrauber am Montagepaltz auf 0,5Nm einstellen.
Insert the PH1 Philips crosshead bit and fix it crosswise from below with the four M3x6mm pan-head screws.
Das PH1 Philips Kreuzschlitzbit einlegen und mit vier M3x6mm Linsenkopfschrauben von unten überkreuz fixieren.
(Beispiel: TE0808)
(example TE0745-02 bottom)
Include Page | ||||
---|---|---|---|---|
|
Overview
Content Tools