...
- When slide switch S2 is in the left position (FX2 PON = power rails conditionally on depending on signal FX2_PS_EN), signal PS_EN is set to signal FX2_PS_EN driven by the EZ-USB FX2LP USB FX2 microcontroller under user control.
Image Added
Figure 34: Slide switch S2 schematic.
Image Added
Figure 35: When slide switch S2 = FX2 PON, signal PS_EN is set to signal FX2_PS_EN driven by the EZ-USB FX2LP USB FX2 microcontroller under user control. - Signal PS_EN enables (high) or disables (low) power rails 2.5V and 1.2V.
- According to the corresponding assembly option, power rail VCCCIO0 can depend or not on the 2.5V power rail.
Power-rail 3.3V is not controlled by signal PS_EN and is unconditionally enabled.
Image Removed
Figure 34: Slide switch S2 schematic.
Image Removed
Figure 35: When slide switch S2 = FX2 PON, signal PS_EN is set to signal FX2_PS_EN driven by the EZ-USB FX2LP USB FX2 microcontroller under user control.
Table 14 summarizes all switching options implied by slide switch S2 under the standard assembly option.
...