The module has two B2B (board-to-board) receptacle connectors (J4 and J5) for a total of 160 contacts. The figure below shows B2B connectors location on board; USB connector is located on the top side and is shown to define module position.
Scroll pdf title |
---|
title | B2B connectors location |
---|
|
|
TE0630 uses high-density shockproof connectors shown in the figure below.
Scroll pdf title |
---|
|
|
Connector part numbers are listed in the table below.
Scroll pdf title |
---|
title | Module connectors part numbers |
---|
|
Supplier | Header |
---|
Digikey | H11113CT-NDH11113TR-NDH11113DKR-ND | Hirose | DF17(3.0)-80DS-0.5V(57) | Trenz Electronic | 22684 |
|
The on-board receptacles mate with their corresponding headers on the carrier board shown in the figure below.
Scroll pdf title |
---|
title | Mating (carrier board) connector |
---|
|
|
Ordering numbers of mating connectors are listed in the table below.
Scroll pdf title |
---|
title | Carrier board headers part numbers |
---|
|
Supplier | Header |
---|
Digikey | H11148DKR-NDH11148TR-NDH11148CT-ND | Hirose | DF17(4.0)-80DP-0.5V(57) | Trenz Electronic | 22938 |
|
The figure below shows the definition of stacking height featured by the combination of the TE0630 receptacle with its corresponding header.
Scroll pdf title |
---|
|
|
The stacking height of the TE0630 B2B connectors is 7 (seven) mm. The stacking height does not include the solder paste thickness.