Page History

...

 Alternate Assembly Options for Slide Switch S2

Slide switch S2 can be replaced by one resistors in the following cases:

• cost sensitive applications
• applications where just one position of S2 is required
• application where switching of S2 is not allowed.

Assembly option when resistor R17 not populated and R19 populated is equivalent to slide switch S2 permanently set to PON.
Figure 37: assembly option: S2 = PON.
Assembly option when resistor R17 populated and R19 not populated is equivalent to slide switch S2 permanently set to FX2 PON.
Figure 38: Assembly option: S2 = FX2 PON.