Page History
...
- Dynamic full power operation (PS_EN = 1): when the EZ-USB FX2LP USB FX2 microcontroller sets signal PS_EN = FX2_PS_EN = high, power rails 1.2 V, 1.5 V and 2.5 V are enabled.
This setting can be useful for . - Dynamic low power operation (PS_EN = 0): when the EZ-USB FX2LP USB FX2 microcontroller resets signal PS_EN = FX2_PS_EN = low, the following components are switched off:
- FPGA core logic (1.2V)
- DDR SDRAM (2.5V)
- FPGA bank 3 (2.5V)
- VREF (2.5V)
- VCCCIO0 (2.5V) FPGA bank 0 (if R131+R132- assembly)
Dip Switch S1B = PON
Full power operation (PS_EN = 1): when Dip switch S1B is in the right position (PON = power rails unconditionally on), signal PS_EN is set to power rail 3.3V. Thus power rails 1.2 V, 1.5 V and 2.5 V are unconditionally enabled.
Figure 39: S1B on position PON (PS_EN ≠ FX2_PS_EN = x; PS_EN = high ).
...
Overview
Content Tools