Page History
...
Figure 33: Dip switch S1[A:B D aka 1:4]. The switch S1B is the one with label 2 and B.
...
Table 40: Dip switch S1B settings overview ( 1.2 V, 1.5 V , 2.5 V, VCCIO0).
Dip switch S1B can be replaced by one resistors in the following cases:
- cost sensitive applications
- applications where just one position of S1B is required
- application where switching of S1B is not allowed.
Assembly option when resistor R17 not populated and R19 populated is equivalent to Dip switch S1B permanently set to PON.
Figure 41: assembly option: S1B = PON.
Assembly option when resistor R17 populated and R19 not populated is equivalent to Dip switch S1B permanently set to FX2 PON.
Figure 42: Assembly option: S1B = FX2 PON.
...
...
.
Overview
Content Tools