...
Each pin of B2B connectors JM4 and JM5 is capable of a maximum current of 1.0 A. |
...
power-rail |
...
name | power-railname | nominalvoltage ||||||||||
nominal | |||||||||||
maximum | powersource | systemsupply | usersupply|||||||||
power | system | user | |||||||||
Vb2b | 4.0 to 7.0 | 4.0 (4 pin × 1.0 A/pin) | JM5 | module | - | ||||||
Vusb | 5.0 | 0.5 | J1 | module | - | ||||||
Vsup | 4.0 to 7.0 | < 0.5 | Vusb | 3 × DC/DC DC/DC sync power-fail | JM5 (≤1.0 A) |
|
| <4 | Vb2b |
| |
< 4 | Vb2b | ||||||||||
3.3V | 3.3 | 3.0 | Vsup â-º DC/DC | module | JM4 (≤1.0 A) JM5 (≤1.0 A) | ||||||
2.5V | 2.5 | 3.0 | Vsup â-º DC/DC | DDR SDRAM | JM5 (≤1.0 A) | ||||||
1.2V | 1.2 | 3.0 | Vsup â-º DC/DC | VCCINT | JM5 (≤1.0 A) | ||||||
VCCAUX | 2.5 | 0.3 | 3.3V â-º LDO | VCCAUX | JM4 (≤1.0 A) |
| |||||
3.3 | < 3.0 | 3.3V | |||||||||
|
| VCCCIO0 | 2.5 | < 3.0 | 2.5V | VCCO | JM4 (≤1.0 A) | ||||
3.3 | < 3.0 | 3.3V |
| JM4 (≤1.0 A) | |||||||
| 1.10 to 3.60 | 2.0 (2 pin × 1.0 A/pin) | JM4 (30 + 44) |
| JM4 (30 / 44) |
Table 1: On-board power rails summary.
During power-on, the /RESET line is first asserted. Thereafter, the supply voltage supervisor monitors the power supply rail 3.3V and keeps the /RESET line active (low) as long as the rail remains below the threshold voltage (2.93 V). An internal timer delays the return of the /RESET line to the inactive state (high) to ensure proper system reset. The delay time of 200 ms starts after the rail has risen above the threshold voltage.
...