Page History

...

pin-out of B2B connector JM5.

Signal Integrity Consideration  

 Traces of differential signals pairs are :

• NOT routed symmetrically (as symmetric pairs).
   
• NOT routed with equal length.
• routed with a differential impedance between the two traces of 60 ohm.

For applications where traces length has to be matched or timing differences have to be compensated, Table 42 and Table 43 list the trace length of I/O signal lines measured from FPGA balls to B2B connector pins.

Pairs of pins that form a differential I/O pair appear colored together in the table. An electronic version of these pin-out tables are available for download from the Trenz Electronic support area of the web site.