...
VCCCIO0
VCCCIO0 supplies VCCO to FPGA bank 0. The following assembly options are possible:
if resistor R131 is not populated and R132 is populated, VCCCIO0 power rail is set to power rail 2.5V (nominal voltage = 2.5 V).
Scroll pdf title | ||
---|---|---|
| ||
|
Note |
---|
Pins 30 and 44 of JM4 are power supply inputs in this case. |
if resistor R131 is populated and R132 is not populated, VCCCIO0 power rail is set to power rail 3.3V (nominal voltage = 3.3 V). This is the default.
Scroll pdf title | ||
---|---|---|
| ||
|
Note |
---|
Pins 30 and 44 of JM4 are power supply outputs in this case. |
if both resistors R131 and R132 are not populated, VCCCIO0 power can be supplied through pins 30 and 44 of B2B connector JM4.
Scroll pdf title | ||
---|---|---|
| ||
|
Note |
---|
Pins 30 and 44 of JM4 are power supply outputs in this case. |
Warning |
---|
Assembly option where both R131 and R132 are populated is not allowed. |
...