Page History
USB FX2 microcontroller Configuration (RAM Firmware
You can use CyConsole and CyControl to directly program the .iic Firmware file into the USB FX2 microcontroller's RAM.
Add 2 images...
| Warning |
|---|
| If you don't also write the IIC EEPROM (Lg EEPROM for CyConsole and xxx for CyControl), the new firmware is lost if the USB FX2 module goes under reset or power off/on cycle). |
IIC EEPROM Configuration (if the module exit from reset or is powered on, the IIC EEPROM content program/configure the USB FX2 microcontroller)
...
FPGA Configuration
The Xilinx Spartan-3E FPGA on the TE0300, Xilinx Spartan-3A DSP FPGA on the TE0320, Xilinx Spartan-6 FPGA on the TE0630 can be configured in the following ways:
...
- Xilinx Spartan-3E FPGA
- Xilinx Spartan-3A DSP configuration modes, please consult the documentation listed in chapter 17 Related Materials and References.
- Xilinx Spartan-6
SPI Flash Configuration (if the module exit from reset or is powered on, the SPI
...
Flash content program/configure the FPGA)
The bit-stream for the FPGA is stored in the SPI Flash. To use this bit-stream source FPGA configuration option is set to “Master Serial/SPI”. See 2.8 SPI Flash for additional information.
...
Overview
Content Tools