Page History
USB FX2 microcontroller Configuration (RAM Firmware)
You can use CyConsole and CyControl to directly program the .iic Firmware file into the USB FX2 microcontroller's RAM.
...
| Warning |
|---|
| If you don't also write the IIC EEPROM (Lg EEPROM for CyConsole and xxx for CyControl), the new firmware is lost if the USB FX2 module goes under reset or power off/on cycle). |
...
IIC EEPROM Configuration (if the module exit from reset or is powered on, the IIC EEPROM content program/configure the USB FX2 microcontroller)
You can use CyConsole and CyControl to directly program the .iic Firmware file into the IIC EEPROM connected to USB FX2 microcontroller.
Add 2 images.
| Warning |
|---|
The firmware actually changes (it runs on USB FX2 microcontroller's RAM) only when
|
FPGA Configuration
The Xilinx Spartan-3E FPGA on the TE0300, Xilinx Spartan-3A DSP FPGA on the TE0320, Xilinx Spartan-6 FPGA on the TE0630 can be configured in the following ways:
...
Overview
Content Tools