Page History

...

The on-board receptacles mate with their corresponding headers on the carrier board shown in Figure 8. the figure below.

Ordering numbers of mating connectors are listed in Table 5.
Figure 8: Mating (carrier board) connectorthe table below.

 Table 5: Carrier board headers part numbers.
Figure 9 shows the definition of stacking height featured by the combination of the TE0630 receptacle with its corresponding header.
Figure 9: B2B stacking
The stacking height of the TE0630 B2B connectors is 7 (seven) mm. The stacking height does not include the solder paste thickness.