Page History

...

The ordering numbers of the connector receptacles are given in the table below.

...

The on-board receptacles mate with their corresponding headers on the carrier board (Figure 6figure below).
Figure 6: mating header.

The ordering number of the headers is given in Table 2.the table below.

The figure below Table 2: equivalent part numbers of the mating connectors.
Figure 7 shows the definition of stacking height featured by the combination of the TE0300 receptacle with its corresponding header. Figure 7: stacking

...

The stacking height of the TE0300 B2B connectors is 7 (seven) mm. The stacking height does not include the solder paste thickness.