type
| colour color
code | type of pins description |
|---|
I/O | Unrestricted, general-purpose user-I/O pin. Most pins can be paired together to form differential I/Os. |
DUAL | Dual-purpose pin used in some configuration modes during the configuration process and then usually available as a user I/O after configuration. If the pin is not used during configuration, this pin behaves as an I/O-type pin. See Xilinx UG332: Spartan-3 Generation Configuration User Guide for additional information on these signals. |
VREF | VREF0 provides a reference voltage input for certain I/O standards. See paragraph 6.9 Voltage Reference VREF0 for additional information on this signal. |
CLK | Either a user-I/O pin or an input to a specific clock buffer driver. Packages have 16 global clock inputs that optionally clock the entire device. See the Using Global Clock Resources chapter in UG331: Spartan-3 Generation FPGA User Guide for additional information on these signals. |
CONFIG | Dedicated configuration pin, two per device. Not available as a user-I/O pin. Every package has two dedicated configuration pins. These pins are powered by VCCAUX. See Xilinx UG332: Spartan-3 Generation Configuration User Guide for additional information on these signals. |
PWRMGMT | Control and status pins for the power-saving Suspend mode. SUSPEND is a dedicated pin and is powered by VCCAUX. AWAKE is a Dual-Purpose pin. Unless Suspend mode is enabled in the application, AWAKE is available as a user-I/O pin. |
JTAG | Dedicated JTAG pin - 4 per device. Not available as a user-I/O pin. Every package has four dedicated JTAG pins. These pins are powered by VCCAUX. |
GND | Dedicated ground pin. All must be connected. |
TE | Trenz Electronic specific pin type. See the description of each pin in the user manual for additional information on the corresponding signals. |