...
You can use CyConsole and CyControl to directly program the .iic Firmware file into the USB FX2 microcontroller's RAM.
Add 2 images.
Warning |
---|
If you don't also write the IIC EEPROM (Lg EEPROM for CyConsole and xxx for CyControl), the new firmware is lost if the TE USB FX2 module goes under reset or power off/on cycle. |
...
You can use CyConsole and CyControl to directly program the .iic Firmware file into the IIC EEPROM connected to USB FX2 microcontroller.Add 2 images.
Warning |
---|
The firmware actually changes (it runs on USB FX2 microcontroller's RAM) only when
|
...
Warning |
---|
If you don't also write the SPI Flash memory, the new bitstream image is lost if the TE USB FX2 module goes under reset or power off/on cycle. |
...
The Xilinx Spartan-3E FPGA on the TE0300, Xilinx Spartan-3A DSP FPGA on the TE0320, Xilinx Spartan-6 FPGA on the TE0630 can be configured in the following ways:
...