Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • click "New..." button of "Local Repositories (available to the current workspace)"
  • select C:\XilinxProject\TE-EDK-IP
    Anchor
    Driver Repository
    Driver Repository
Scroll pdf title
titleAdd reference with double indirection (as required by Xilinx SDK)

...

  • after this you should click "standalone" and set "stdin" and "stdout" to "rs232" or "debug_module"

...

Tip
Demo program (running on MicroBlaze) will work even in case the UART port is left unconnected: it is not necessary to use a USB/Uart converter or Uart port on a PC, if you are using XMD UART HDL block.

...

  • after this you should click drivers to verify that all HDL device/module are supported by the driver in the repository C:\XilinxProject\TE-EDK-IP
  • the FX2 microcontroller on the TE0300, TE0320 or TE0630 family should contain valid firmware before proceeding. If the FX2 microcontroller has not been programmed before, please follow the instructions in the ????? family User Manuals. You can use Cypress, Python OpenFut or C# OpenFutNet programs.
  • If you are sure that the FX2 microcontroller is properly connected, you can connect to the TE0300/TE0320/TE0630 module with a JTAG adapter cable. We recommend using the Xilinx Platform Cable USB. Then connect the TE0300/TE0320/TE0630 module to a USB cable.

...