Versions Compared

Old Version 26

changes.mady.by.user Sergio Pavesi

Saved on

compared with

New Version 27

changes.mady.by.user Sergio Pavesi

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Tip
Demo program (running on MicroBlaze) will work even in case the UART port is left unconnected: it is not necessary to use a USB/Uart converter or Uart port on a PC, if you are using XMD UART HDL block.
Scroll pdf title
titleBSP rs232 or debug_module
Image Added
  • after this you should click drivers to verify that all HDL device/module are supported by the driver in the repository C:\XilinxProject\TE-EDK-IP
Scroll pdf title
titleBSP driver
Image Added

 

  • the FX2 microcontroller on the TE0300, TE0320 or TE0630 family should contain valid firmware before proceeding. If the FX2 microcontroller has not been programmed before, please follow the instructions in the ????? family User Manuals. You can use Cypress, Python OpenFut or C# OpenFutNet programs.
  • If you are sure that the FX2 microcontroller is properly connected, you can connect to the TE0300/TE0320/TE0630 module with a JTAG adapter cable. We recommend using the Xilinx Platform Cable USB. Then connect the TE0300/TE0320/TE0630 module to a USB cable.

...