Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

3) Create a Board Support Package Project

  • You should click "File" >"New" > "Project"
  • a pop up "New Project" will appears
  • click"Xilinx">"Board Support Package", then next
  • a new pop up "New Board Support Package Project" will appear;
Scroll pdf title
titleNew Xilinx Board Support Packages
Image Removed
  • select "standalone" for "Board Support Package OS" and "standalone_bsp_0" for the "Project name"
  • a new pop-up will appear "Board Support Package Settings"
Scroll pdf title
titleBSP overview
Image Removed
  • after this you should click "standalone" and set "stdin" and "stdout" to "rs232" or "debug_module"
    1. you should select "rs232" if you desire to use an external UART
    2. you should select "debug_module" if you desire that the XMD_UART works as local UART through the JTAG connection
Tip
Demo program (running on MicroBlaze) will work even in case the UART port is left unconnected: it is not necessary to use a USB/Uart converter or Uart port on a PC, if you are using XMD UART HDL block.
Scroll pdf title
titleBSP rs232 or debug_module
Image Removed
  • after this you should click drivers to verify that all Microblaze components are supported by the driver in the repository C:\XilinxProject\TE-EDK-IP; click "OK" and the pop-up should dissapears;
Scroll pdf title
titleBSP drivers for Microblaze components
Image Removed
  • after you have verified that all Microblaze components are supported by a driver,  right click the "standalone_bsp_0" folder in "Project Explorer" and
  • the pop-up "Properties for standalone_bsp_0" should appears
  • click "Project References"
  • you must verify that "standalone_bsp_0" references to "reference-TE0300_hw_platform":if is not checked you must check the box.
Scroll pdf title
title"standalone_bsp_0" Project References
Image Removed
  • click "OK";
  • after this, you should wait until the SDK compile the added files (C-Build [standalone_bsp_0]) and a message 'Finished building libraries' appears

Image Removed

4)(Re)Create the "Application Project" demo

...