Page History

...

Procedure SDK: opening and update SDK project only ('updated' SW on 'NOT updated' HW)	Procedure XPS+SDK: opening and update both XPS and SDK project projects ('updated' SW on 'not updated' HW')
	update XPS project from an old version to a new one and export the HW project to SDK;
open SDK project and (if needed) update the SDK project from an old version to a new one	recreate SDK project using the new exported HW project;
download the bitstream to the FPGA,
check the fiirmware of FX2 microcontroler;
run the demo project.
USB communication tests + DMA tests

...

If the FX2 microcontroller has not been programmed before, please follow the instructions here and here. You can use Cypress, Python OpenFut or C# OpenFutNet programs.
If you are sure that the FX2 microcontroller is properly connected, you can connect to the TE0300/TE0320/TE0630 module with a JTAG adapter cable. We recommend using the Xilinx Platform Cable USB.
Then connect the TE0300/TE0320/TE0630 module to a USB cable.

...

5) Run the demo project

...