Tip |
---|
To see the device status you should open "Device Manager" using one of this two procedure: - Start\Control Panel\System and Security\System\Device Manger
- write devmgmt.msc in the line “Search programs and files” to go directly to the Device Manager
|
Note |
---|
If the TE0300 module is used, the S2 switch must be turned on (RUN). If the TE0320 module is used, the S1D switch must be turned on (RUN). |
If the user needs to use
TE API Commands and
TE API libraries, he/she needs this driver because this driver is used with
USB FX2 microcontroller firmware (Generation 3) (which was already flashed to the supplied TE modules from 2nd September 2013) .
...