...
This command starts writing data integrity test for the data transmitted from the host computer to EP8 of the USB FX2 microcontroller.
This MicroBlaze command does not require the use of SET_INTERRUPT before and GET_INTERRUPT after. It is instead required to send this command before starting data transmission from the host computer to the USB FX2.
...
Scroll Title |
---|
title | FX22MB_REG0_START_RX MicroBlaze command. |
---|
|
Byte | Value | Description | 1 | 0xAD | I2C_WRITE FX2 API command ID | 2 | 0x3F | I2C Address MB_I2C_ADDRESS=0x3F | 3 | 0x0C (12) | FX2_Parameters.I2C_BYTES=0x0C Number of bytes to write (max 32) | 4 | 0x00 | - | 5 | 0x00 | - | 6 | 0x00 | - | 7 | 0x03 | MB_Commands.FX22MB_REG0_START_RX Start read This command starts writing data integrity test of for the data transmitted from the host computer to EP8 of the USB FX2 microcontroller. | From 8 to 64 | - | Not used |
|
Reply packet doesn't contain any usable information