Before driver installation
Note |
---|
Please Insert the TE USB FX2 module and then check your VID/PID in device manager (devmgmt.msc > properties > details > Hardware Ids). |
...
- TE03xx-USB_32-64.zip
- Trenz Electronic hardware: TE0300 series, TE0320 series, TE0630 series
- VID (vendor identifier): 0547 (Anchor Chips, now Cypress Semiconductor)
- PID (product identifier): 1002 (Python2 WDM Encoder)
- device drivers: DEWESoft USB FX2 (generation 2)
- SW API: DEWESoft_API (generation 2)
- FW APIs: FW TE API
Generation 2 device drivers are provided by DEWESoft and can also be downloaded from here or here.
...
- TE_USB_FX2-drivers.zip
- Trenz Electronic hardware: TE0300 series, TE0320 series, TE0630 series
- VID (vendor identifier): 0BD0 (Trenz Electronic GmbH)
- PID (product identifier): 0300 (USB 2.0 FPGA modules)
- device drivers: Trenz Electronic USB FX2 (generation 3)
- SW APIs: C++ TE_USB_FX2_CyAPI.dll (generation 3), C# TE_USB_FX2_CyUSB.dll, C++ CyAPI.lib, C# CyUSB.dll (the latter two APIs are available in Cypress SuiteUSB 3.4)
- FW APIs: FW TE API
Documentation
- USB Drivers Installation - User Manual (UM-drivers-TE_USB_FX2.pdf)
- video play list: Microsoft Windows XP 32 bit and 64 bit;
- video play list: Microsoft Windows Vista 32 bit;
- video play list: Microsoft Windows 7 64 bit;
- video play list: Microsoft Windows 8 64 bit.
...
Note |
---|
The second driver is not recommended because two PID PIDs are possible.
Same VID and two different PIDs are possible (written in the .inf file): Cypress VID (0x04B4) and PID (0x8613) (are typically shown) Cypress VID (0x04B4) and ND-tech PID (0x1004) (it is shown if the board is disconnected and reconnected without power cycle after the firmware download onto EEPROM: this procedure is not correct)
|