Page History
...
#1 Replaced I2C pullups by 2K (R20 and R21)
Type: BOM change
Reason: Avoid possible to weak pullup Pullups too weak in similar configurations.
Impact: None.
#2 Connected WP (pin 7) of EEPROM (U10)
...
via R79 GND, added not fitted R72 to 1.8V rail.
Type: Schematic change
Reason: EEPROM was constantly write protected , or had to be patched.
Impact: EEPORM is not write protected, no patch needed. For enabling write protection R72 can be assembled instead of R79.
#3 Moved following components away from FPGA: C28, C29, C77, C80, R2, R12, R18, R43, R47, R51, R54, R57, R62, L8, L9.
...
Impact: Track it pad no more available.
#5 Added legal notices to Schematic
Type: Documentation change
Reason: Increase awarness of legal usage.
Impact: None.
#6 Full update from Library
Type: PCB change
Reason: Improve production yield.
...
Overview
Content Tools