Page History
...
| Warning |
|---|
Important: start by pulling corners 1 and 2, then pull corners 3 and 4! |
The Trenz Electronic TE0720 SoC serves as an illustrative photo for all 4 x 5 cm modules. Please consider the connector positions on your module.
Take a soft lever, like a plastic pen, and start lifting the module at position 3 about 1 mm, then proceed with position 4.
...
Failure to follow this procedure will very likely cause the left right connector to break on the base board, as it is very hard to apply a controlled pull force by hand.
Video: Removal Instructions
Widget Connector
Overview
Content Tools